Overview
The Crown Automotive 68003698AA is a front caliper piston kit for the 2009–2013 Dodge Journey, 2007–2011 Dodge Nitro, 2008–2012 Jeep Liberty and 2007–2018 Jeep Wrangler. It includes the piston, boot and seal o-ring, and it is sold individually.
The piston pushes the brake pad against the rotor, and the boot and o-ring seal keep dirt and brake fluid out of the bore. A kit like this lets a leaking or seized caliper be rebuilt. Each kit is sold individually, so rebuilding both front calipers takes two kits. The kit is a direct fit, and no modification is needed for the caliper.
Key features
- Front caliper piston kit
- Includes the piston, boot and seal o-ring
- Sold individually
- Direct fit listing
- Covers the Dodge Journey, Dodge Nitro, Jeep Liberty and Jeep Wrangler
Caliper rebuild considerations
A front caliper holds the piston that presses the brake pad against the rotor, and it works under heat and pressure every time you brake. Rebuilds often follow a leak, a sticking piston or pad wear that has gone uneven. Replacing the piston, boot and seal together gives the caliper fresh seals at the same time.
Before reassembly, look at the caliper bore. Scoring or pitting will leak even with new seals, so a damaged bore may call for a new caliper. Keep the bore clean and dry, use fluid from a sealed container, and avoid touching the new seals with oily fingers. Confirm the brake pads and rotor are in good shape before reassembly.
- Check the bore for scoring or pitting
- Replace brake fluid after opening the circuit
- Bleed the brakes once the rebuild is complete
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 68003698AA |
| UPC | 848399077896 |
| Part type | Caliper piston kit |
| Position | Front |
| Contents | Piston, boot and seal o-ring |
| Sold as | Individually |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2009–2013 Dodge Journey, the 2007–2011 Dodge Nitro, the 2008–2012 Jeep Liberty and the 2007–2018 Jeep Wrangler, covering the full JK generation of Wrangler. The kit fits Dodge and Jeep models, not Wranglers alone.
Other years of these models are not covered. Because the kit is sold individually, a second one is needed to rebuild both front calipers. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Rebuilding a caliper with this kit opens the hydraulic circuit, so the brakes need bleeding afterward. Order one kit per caliper, since each is sold individually. Check the caliper bore for scoring or pitting before installing the new piston; a damaged bore will leak even with new seals. Keep the bore and new parts free of dirt and oil during assembly.
What’s included
- Piston
- Boot
- Seal o-ring
Not included: the caliper body, brake pads, rotor, brake fluid or a second kit for the other side.









