Overview
The Crown Automotive 56028995AA is an oxygen sensor for 4.0L engines, with a front position before the catalyst and a rear position after it. It fits 2004–2011 Jeep Wrangler TJ and Liberty (KJ), Dodge Dakota, Durango and Ram, Chrysler Aspen and Pacifica, and Mitsubishi Raider models.
An oxygen sensor reports exhaust oxygen content to the engine computer, and where it sits in the exhaust matters. Confirm the position your engine uses before replacing the sensor.
Key features
- 4.0L engine application
- Front sensor before the catalyst
- Rear sensor after the catalyst
- Direct fit, Crown Automotive part number 56028995AA
Front and rear sensor roles
The front sensor reads exhaust before the catalytic converter and helps the computer set the fuel mixture in real time. The rear sensor reads exhaust after the converter and is mainly used to judge whether the converter is still doing its job. Because the two sensors do different jobs, they are not interchangeable even though they look alike.
When replacing either sensor, check the connector for corrosion and confirm the new sensor’s heater wire is routed correctly. Warm-up time is shorter with a working heater circuit, so a sensor that will not heat can leave the engine running rich for longer after a cold start. Read live data with a scan tool once the engine is at operating temperature to confirm the signal responds.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 56028995AA |
| UPC | 849603003519 |
| Engine size | 4.0L |
| Sensor position | Before catalyst (front) and after catalyst (rear) |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2008–2009 Chrysler Aspen (Limited and Limited Hybrid); 2005–2008 Chrysler Pacifica (Base and LX); 2005–2010 Dodge Dakota; 2005–2009 Dodge Durango; 2005–2010 Dodge Ram 1500 and 2500; 2005–2009 Dodge Ram 3500; 2004 Jeep Liberty (KJ, Sport); 2004–2006 Jeep Wrangler (TJ); 2006–2009 Mitsubishi Raider; and 2011 Ram 1500, 2500 and 3500.
Wrangler TJ years outside 2004–2006 and Wrangler JK are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the front or rear position to your engine’s original sensor, since the two locations are listed separately. Work on the exhaust only when it is cool.
What’s included
One oxygen sensor, part number 56028995AA. Check wiring and connectors against your installation before starting.









