Overview
The Crown Automotive 52125003AB is a rear wheel speed sensor for the rear left or rear right position. It fits the 2007-2018 Jeep Wrangler (JK), 2008-2012 Jeep Liberty (KJ) and 2007-2011 Dodge Nitro.
Each wheel speed sensor reports that wheel’s rotation to the anti-lock brake and stability systems.
Key features
- Rear left or rear right position
- Direct-fit replacement
- Covers Jeep Wrangler JK, Jeep Liberty and Dodge Nitro
Wheel speed sensor basics
A wheel speed sensor reads a toothed ring at the hub or axle and sends a pulse to the control module as the wheel turns. The module compares wheel speeds to detect slip, which is how the anti-lock brakes and traction control know when to act. A sensor that fails sends no signal or an erratic one, and the system responds by disabling those functions.
Failures are usually caused by a cracked sensor body, a worn or damaged tone ring, or a connector that has corroded. Dirt and metal debris can build up on the sensor tip and weaken the signal. Check the wiring for chafing and inspect the ring for missing teeth before replacing the sensor.
When installing, clean the mounting bore and apply only the light coating of grease the sensor design calls for. Route the wire clear of moving parts and the exhaust.
- Inspect the tone ring for missing or damaged teeth
- Check the connector for corrosion
- Keep the sensor tip free of debris
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52125003AB |
| UPC | 849603008354 |
| Part type | Wheel speed sensor |
| Position | Rear left or rear right |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2007-2011 Dodge Nitro, the 2008-2012 Jeep Liberty (KJ) and the 2007-2018 Jeep Wrangler (JK).
The 2002-2007 Liberty is not in this list. Confirm your vehicle’s year, model and trim before ordering.









