Overview
The Crown Automotive 4886186AA is a rear leaf spring assembly for the 1984–2001 Jeep Cherokee (XJ), described by the maker as heavy-duty. It is a four-leaf unit sold as a single spring, and its listed lift range is stock height with a direct replacement design.
Bushings are not included with this assembly. Compare the bushings you are removing with the new spring eyes before installation, since they have to fit the eye they sit in. The UPC is 848399030600.
Key features
- Rear mounting position
- Four-leaf construction
- Single spring assembly
- Stock-height direct replacement range
- Heavy-duty construction
Stock-height spring swaps
Stock-height rear springs return the rear of a Cherokee XJ to the height it was built to carry. A spring that has lost arch or cracked leaves can drop the rear, change the way the axle sits, and make the ride feel loose. Before ordering, check the spring eyes, shackles and bump stops, since a new spring works best when the parts around it are sound.
Set the vehicle on level ground and support the axle before loosening hardware. Lay the old spring and the new one side by side to confirm the eye spacing and mounting points match. Keep the old bushings only if they are sound, and remember that a new spring cannot make up for worn shocks or a damaged axle mount.
- Check spring eyes for cracks and wear
- Inspect shackles and their pivots
- Confirm bump stops are in good condition
- Re-check hardware after the first few drives
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 4886186AA |
| UPC | 848399030600 |
| Position | Rear |
| Leaf count | 4 |
| Spring quantity | Single spring |
| Lift height range | Stock height, direct replacement |
| Bushings | Not included |
Vehicle fitment
It fits the 1984–2001 Jeep Cherokee (XJ) across its trim levels. Confirm fit for your vehicle’s year, model and trim before ordering, since Grand Cherokee, Liberty and Wrangler models are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the vehicle on level ground and support the axle before loosening the spring hardware, since the axle moves as the old spring comes out. Check the new spring eyes against the bushings before the hardware is fully tightened.
What’s included
One leaf spring assembly.
Not included: Bushings.









