Overview
The Crown Automotive A612 is a front leaf spring assembly with an 8-leaf pack for the 1946–1949 Jeep Willys CJ-2, the 1949–1953 Jeep Willys CJ-3 and the 1941–1942 Willys MB.
It is a no-lift direct replacement, so it keeps the original ride height. The bushings are not included with the assembly.
Key features
- Front position
- Eight-leaf pack
- No-lift direct replacement
- Single spring assembly
- Bushings not included
Keeping an older leaf spring serviceable
Older front springs on flatfender-era vehicles often rust between the leaves, which keeps them from moving freely and makes them feel stiff over rough ground. A spring that has lost its arch can also sit the front end lower on one side, changing how the vehicle tracks on the road.
When a leaf spring is out for service, cleaning and inspecting the leaves is worth the time. Separate the leaves where possible, remove rust and check each leaf end for cracks. Many owners add a light coat of grease between the leaves during reassembly, and the U-bolts and spring perch should be checked for wear at the same time.
- Clean rust from between the leaves
- Check each leaf tip for cracks
- Inspect the U-bolts and spring perch
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | A612 |
| UPC | 848399050271 |
| Position | Front |
| Leaf count | 8 |
| Lift height range | No lift, direct replacement |
| Spring quantity | Single spring |
| Bushings | Not included |
Vehicle fitment
It fits the 1946–1949 Jeep Willys CJ-2, the 1949–1953 Jeep Willys CJ-3 and the 1941–1942 Willys MB (Base). Jeep CJ-5 and CJ-7 models are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Support the front axle securely before removing the old spring hardware. Check the condition of the spring eyes and bushings on the vehicle before the new assembly goes in.
What’s included
One front leaf spring assembly.
Not included: Bushings.









