Overview
The Crown Automotive 52003449 is a heavy-duty rear leaf spring assembly for the 1987–1995 Jeep Wrangler (YJ). It has six leaves and is a factory replacement design.
Bushings are not included. The spring is a single-spring design set for stock height, so it is a replacement rather than a suspension lift.
Key features
- Rear position
- Six-leaf pack
- Factory replacement design
- Heavy-duty assembly
- Stock-height range
Rear springs under load
A rear leaf spring carries most of the cargo and passenger load on a truck or open-top vehicle, so its hangers, shackles and U-bolts take steady stress. Leaves can take a set over years, and a tired rear spring often shows as a rear end that sits low when loaded or rides with a bounce after bumps.
Good rear spring service also means checking the parts around the leaves. Shackle bushings wear and let the spring move loosely, and U-bolts can loosen after the first few hundred miles of new service. Clean the leaves between them when the spring is out, and look for rust or cracks at the spring perch.
- Check shackle bushings for play
- Look for cracked or broken leaves
- Retorque U-bolts after the first few drives
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52003449 |
| UPC | 848399013214 |
| Position | Rear |
| Leaf count | 6 |
| Design | Factory replacement |
| Spring quantity | Single spring |
| Lift height range | Stock height, direct replacement |
| Bushings | Not included |
Vehicle fitment
The manufacturer list names the 1987–1995 Jeep Wrangler (YJ) for this rear spring. Other Jeep models, including the Cherokee XJ and the Wrangler TJ, are not in the list.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Leaf springs are heavy, so use a helper or a lifting device when removing and installing the assembly. Support the rear axle with stands before the spring hangers and shackles are loosened.
What’s included
One rear leaf spring assembly.
Not included: Bushings.








