Overview
The Pro Comp Suspension 32000 is a leaf spring with a height of 2 inches. Each set for one axle or position uses two springs, and the fitment type is direct fit.
Confirm the leaf spring position and your vehicle’s year, model and trim before choosing this part. Compare the 2 inch height and the count of two with your existing setup.
Leaf spring setup
A leaf spring controls the axle location as well as the load, so the spring pack and its mounts should be inspected when a spring is replaced. Check the spring eye bushings, shackle pins, center bolt and U-bolts for wear before fitting new springs. Sagging leaves or a broken leaf are signs that a pack is tired and may need replacing as a set.
When fitting new springs, make sure the pair is installed on the same side and in the same position, so the ride height and axle angle match. Torque the hardware once the vehicle is on the ground, and recheck the U-bolts after the first few drives. Keep the spring pack clean and lubricated at the leaf interfaces, and check the bushings at each service interval.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 32000 |
| UPC | 614901234817 |
| Height | 2 inch |
| Quantity required | 2 |
| Fitment type | Direct fit |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Match the spring to your existing leaf before installing it.
What’s included
Two leaf springs are needed for a complete application. Check the package contents against your installation before starting.












