Overview
The Crown Automotive J0937325 is a steel front brake S line, the short curved hard line in the front brake circuit, for vehicles with 10 inch brakes. It fits the driver or passenger side front on the 1966-1971 Jeep CJ5, CJ6 and Commando, driver or passenger side front.
The line is stock length, so it matches the original front brake line.
Key features
- Steel S line
- Driver or passenger side front
- For 10 inch brakes
- Stock length
Brake line replacement basics
An S line is the short curved rigid line that carries brake fluid between the frame-mounted hard line and the flexible hose at the wheel. Its shape has to match the original, so the bends and ends line up without stressing the flare fittings. Steel lines resist heat and road debris better than many substitutes, but they still corrode where salt and mud collect.
When fitting a new line, start every flare fitting by hand before tightening, and avoid cross threading. Route the line away from exhaust heat and moving parts, and secure it in the original clips. Replace the flexible hose at the same time if it is cracked or swollen. Bleed the brakes after any line work, and check for leaks with the pedal held firmly.
- Inspect flare fittings for cracks
- Check clips for chafing points
- Bleed the system after replacement
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0937325 |
| UPC | 848399055351 |
| Part type | Front brake S line |
| Material | Steel |
| Position | Front, driver or passenger side |
| Brake size | 10 inch |
| Length | Stock |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1966 to 1971 Jeep CJ5, CJ6 and Commando.
This line is for 10 inch brakes only. Confirm your vehicle’s year, model and trim before ordering.









