Overview
The Crown Automotive JA000557 is a brake master cylinder Y-fitting for classic Jeeps. It fits the 1959 Jeep CJ3, CJ5 and CJ6, Willys CJ-2 (1946-1949), CJ-3 (1949-1958), CJ-5 (1955-1958), CJ-6 (1956-1958), and the 1941-1942 Willys MB.
Confirm the thread size, fitting dimensions and material against the original fitting before installing.
Key features
- Master cylinder Y-fitting
- Direct-fit replacement
- Covers 1941-1959 Jeep and Willys models
Before you buy
A master cylinder Y-fitting splits the hydraulic line so fluid can reach both sides of the system from one outlet. Its job is simple, but a leak at the fitting can drop pressure to one circuit, which makes stopping less predictable.
When you replace it, flare the new lines carefully, avoid over-tightening the fittings, and bleed the brakes afterward. Check the lines that connect to the fitting, since old rubber or brittle steel lines often cause the same leaks that the fitting gets blamed for.
Classic Jeeps often have brake parts that have been changed over the years, so confirm the fitting matches your actual hardware before you cut anything.
- Check for weeping at each flare
- Look for corrosion on the fitting body
- Bleed all wheels after the install
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | JA000557 |
| UPC | 848399073027 |
| Part type | Master cylinder Y-fitting |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1959 Jeep CJ3, CJ5 and CJ6 and the Willys CJ-2, CJ-3, CJ-5, CJ-6 and 1941-1942 Willys MB.
Jeep CJ models after 1959 are not covered. Confirm your vehicle’s year, model and trim before ordering.









