Overview
The Omix-ADA preformed steel brake line kit, part 16737.04, is a set of steel brake hard lines for Jeep vehicles.
Preformed lines are shaped before they arrive, so they can be placed against the original routing rather than bent from straight tubing.
Lines, routing and leak checks
Steel brake lines resist heat, road debris and corrosion better than many rubber alternatives, which is why they are common on the hard line sections of a brake system. Routing matters as much as the material. Lines should clear the suspension at full travel, stay away from exhaust heat and sit where they cannot rub on a sharp edge or bracket.
Flared fittings are the most common failure point after a line swap. Inspect each flare for cracks and seat it squarely before tightening. After installation, bleed the system fully, check every joint for leaks with the pedal applied, and recheck clearances once the vehicle is back on the ground.
- Check clearance at full suspension travel
- Inspect flares for cracks before tightening
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 16737.04 |
| UPC | 804314075682 |
| Part type | Steel brake line kit |
| Line type | Preformed steel |
Vehicle fitment
Check fit against your year, model and trim before ordering the kit. Compare the routing with your original lines before installing the kit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brake line work should be followed by a leak check and a full brake bleed before the vehicle is driven.
What’s included
A preformed steel brake line kit.









