Overview
The Omix-ADA 16732.03 is a front brake line for 1966–1971 Jeep CJ5 and CJ6 models and the 1967–1971 Jeepster, made for vehicles with 10 inch brakes. The hose is 11 inch overall length and is sized for stock height, 0 to 2 inches of lift.
Key features
- For vehicles with 10 inch brakes
- 11 inch overall length
- Front position
- Stock height, 0 inches to 2 inches of lift
- Built to original specifications as a direct OE-style replacement, with a limited five year warranty.
Brake line care on older Jeeps
Front brake hoses flex with suspension travel and steering, so they are worth checking closely during any lift or axle work. Rubber hoses can swell or crack with age, and a hose that rubs against a bracket or spring can wear through. Look at both ends of the hose where it meets the caliper and the steel line, since fittings are common leak points.
When replacing a hose, keep the steel line and fittings in good shape, and use a flare or fitting tool that matches the connection. Note the routing before removal so the new hose sits clear of the tires and frame. Bleed the brakes after the new line is installed and check for leaks under pedal pressure. Replacing worn pads or a dragging caliper at the same time avoids repeat work.
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16732.03 |
| Position | Front |
| Brake size | 10 inch brakes |
| Overall length | 11 inch |
| Hose material | Rubber |
| Lift height | 0 inches to 2 inches |
| Fit | Direct fit |
Vehicle fitment
It fits the 1966–1971 Jeep CJ5 and CJ6 and the 1967–1971 Jeep Jeepster.
The hose is rubber, though the product name refers to stainless steel. Confirm the hose material before ordering if it matters for your installation. Confirm fit for your vehicle’s year, model and trim before ordering.









