Overview
The Crown Automotive J3172566 is a Model 20 differential case side bearing cup for the rear position. It holds the bearing that supports the differential case inside the housing, so it must match the Model 20 unit it sits in. It is a direct fit for several Jeep models from the 1976 through 2007 model years.
It is a single part in the differential bearing assembly, sold under part number J3172566 for the rear position. It is separate from the case, the bearing and the ring and pinion.
Key features
- Model 20 differential case side bearing cup
- Rear position, direct fit
- Part number J3172566
- Replacement from Crown Automotive’s Jeep range
Side bearing preload and case alignment
The side bearings carry the differential case and set its position in the housing, so the cup is part of the alignment as well as the support. If a side bearing cup is worn or seated unevenly, the case can shift, which changes the gear mesh and the preload on the pinion. Careful checking after assembly is worth the time.
After the cup is pressed in, set the side bearing preload and then check the ring gear runout and backlash. Make sure the case turns smoothly with no binding before the cover is closed. Shims and adjusters are often reset during this step, so keep track of where each one came from.
- Noise from the carrier that changes with load
- Rough or notchy rotation of the case by hand
- Gear mesh that is hard to set during assembly
- Wear marks on the cup surface
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J3172566 |
| UPC | 848399058222 |
| Differential | Model 20 |
| Part type | Side bearing cup |
| Position | Rear |
| Fitment | Direct fit |
Vehicle fitment
It fits the 1991-2001 Jeep Cherokee (XJ), the 2002-2007 Jeep Liberty (KJ), and the 1976-1983 CJ5, 1976-1986 CJ7, 1976-1986 J10 and 1981-1985 Scrambler, each as a direct fit in the rear position.
Other model years and Model 20 applications are outside this fit. Wrangler and Grand Cherokee models are outside this fit as well. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the bearing preload and the case alignment after the cup is pressed in, since the side bearing cup sets the position of the case in the housing. Check the cup seats squarely before the bearing goes on.
What’s included
One Model 20 differential case side bearing cup.
Not included: The side bearing, case and ring and pinion are sold separately.








