Overview
The ARB RD105 is a rear air locking differential for the Dana 35 axle, with 30 splines and a 3.54 ratio up gear set. It turns an open rear differential into a full spool, so both rear wheels can receive drive when one loses traction.
An ARB air compressor powers the locker and is not included. The fitment field reads Universal Fit, but the Dana 35 axle type and 30 spline count make it suit only matching rear axles.
Key features
- Selectable locker that switches an open rear differential to a full spool
- Dana 35 axle type in the rear position
- 30 spline axle compatibility
- 3.54 ratio up gear set
- Air-operated design.
Carrier work and gear setup
A rear air locker involves removing the carrier, fitting the locker, and setting the ring and pinion gears. Each step affects how the axle wears and how quiet it runs. Shops often check backlash, bearing preload and the gear pattern before the carrier goes back in, since small errors cause noise and early wear.
Air lines need careful routing on a rear axle. Keep them clear of the driveshaft, shock mounts and suspension arms, and use grommets where lines pass through the frame. Once the install is done, test engagement at low speed in an open area and recheck the lines after the first few drives.
- Confirm backlash and preload with the shop
- Route air lines clear of the driveshaft and shocks
- Recheck fittings after the first few drives
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD105 |
| UPC | 837290004285 |
| Axle manufacturer | Dana |
| Axle location | Rear |
| Axle type | Dana 35 |
| Axle spline | 30 splines |
| Gear ratio | 3.54 ratio up |
| Differential type | Selectable locker |
Vehicle fitment
It is for a rear Dana 35 axle with 30 splines. Match your rear axle to that name and spline count before buying.
Front Dana 30 lockers are separate parts and are not covered by this unit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A rear locker involves carrier work and gear setup, so have an experienced shop handle the install, the gear set and the air line routing to the compressor.
What’s included
a compressor from ARB, sold separately.
Not included: a compressor from ARB, bought on its own.







