Overview
The G2 Axle and Gear 65-2011B is a limited slip differential case for the Ford 9 inch rear axle. It is a limited slip case only and replaces the factory case.
The case gives the correct case break for the gear ratio you choose. It is sized for the Ford 9 inch rear axle.
Key features
- Limited slip differential case only
- Ford 9 inch rear axle type
- Empty axle spline
- Economical way to get the proper case break for the gear ratio
Limited slip case work
A limited slip case holds the clutch packs, spring stacks and side gears that give the unit its lock-up action. When the case is opened for a rebuild, check the clutch plates for glazing and the spring stacks for fatigue. Worn clutches cause chatter and a weak lock, so they are commonly replaced with the friction discs at the same time as the case.
Preload on a limited slip case is set through the carrier, so the rebuild should be done in a clean setting with the right tools. Use fresh fluid with the friction modifier the unit needs once it is assembled, and keep the axle seals in good shape.
- Inspect clutch plates for glazing and wear
- Check spring stacks for fatigue
- Replace friction discs with the case when worn
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 65-2011B |
| UPC | 631410096330 |
| Popular axle manufacturer | Ford |
| Axle location | Rear |
| Axle type | Ford 9 Inches |
| Axle spline | Empty case |
| Differential type | Limited slip differential case only |
Vehicle fitment
Confirm fit by matching the Ford 9 inch axle size to your housing before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Ring gear and pinion fitment and gear setup on a limited slip case should be done by a professional, since the case arrives empty.
What’s included
One limited slip differential case with an empty spline.
Not included: internal gears and any clutch parts, since the case is empty.








