Overview
The Crown Automotive A867K is a spindle washer and nut kit for Dana 25, Dana 27 and Dana 30 axles. Spindle nuts and washers secure the wheel bearing and hub on the axle spindle, so this kit is for owners replacing that hardware on one of those three axle families. The kit is identified by axle type rather than by vehicle model or year.
Key features
- Includes a spindle washer and a spindle nut
- Covers Dana 25, Dana 27 and Dana 30 axles
- Crown Automotive replacement hardware for Jeep vehicles
- Single kit identified by part number A867K
Matching hardware to your axle
Axle families can look similar from the outside, so the spindle, nut and washer should be matched to the specific axle rather than assumed. Before ordering, look at the axle housing markings, the spindle diameter and the hub style on your vehicle. Measuring the old washer and comparing the nut thread against the old nut will catch mismatches before the parts reach the bench.
Spindle nuts carry the bearing preload, so wear in the threads or a washer that has flattened will allow the hub to move. Inspect the spindle threads for damage and check the washer face for deep marks before reusing either piece. Spindle hardware is a small part of a larger hub assembly, so when the hub is apart it is worth looking at the bearings and seals as well.
- Check the axle housing markings
- Measure the spindle thread before ordering
- Inspect the spindle for scoring
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | A867K |
| UPC | 848399078527 |
| Axle applications | Dana 25, Dana 27, Dana 30 |
| Included | Spindle washer and spindle nut |
Vehicle fitment
The kit is identified by axle type, so identify your axle as a Dana 25, 27 or 30 before ordering.
Other Dana axle families are not covered by this kit. Verify your vehicle’s year, model and trim before placing the order.









