Overview
The Omix-ADA 16710.01 is a spindle washer and nut kit for early Jeeps from 1941 to 1986. It fits the CJ3, CJ5, CJ6, CJ7, Scrambler and Willys models. The kit contains a spindle washer with a nub for the spindle slot, plus the spindle nut.
A spindle washer and nut hold the front wheel bearing in position on the spindle. The nub on the washer engages a slot in the spindle, which keeps the washer from turning when the nut is tightened.
It is a direct OE replacement built to original specifications, with a limited five year warranty.
Key features
- Spindle washer and nut kit
- Washer has a nub for the spindle slot
- Includes the spindle nut
- Direct OE replacement from Omix-ADA
- Fits CJ3, CJ5, CJ6, CJ7, Scrambler and Willys models
Setting spindle and bearing position
The spindle washer and nut set the position of the front wheel bearing on the spindle, and the bearing preload determines how freely the hub turns. A washer that is not seated correctly in the slot can let the nut back off or shift the bearing, which causes play or heat at the hub. Set the nut to the specification in your service manual, then check that the wheel turns freely with no binding.
Because the washer and nut carry the hub’s adjustment, inspect the spindle threads and the slot for wear whenever the hub is opened. A worn slot can let the washer rotate, so replace the washer when the nub is bent or the slot is damaged. Clean the threads before fitting the nut and tighten it in the correct sequence.
- Check the slot for elongation
- Replace a bent or cracked nub
- Clean spindle threads before fitting
- Recheck hub play after the first drive
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16710.01 |
| UPC | 80431406858 |
| _pn | 16710.01 |
| Part type | Spindle washer and nut kit |
| Contents | Spindle washer with nub, spindle nut |
| Fit type | Direct fit (Omix-ADA) |
Measure the thread size and dimensions against your old parts before installing.
Vehicle fitment
It fits the 1959-1960 and 1966 CJ3; the 1959-1960 and 1966-1983 CJ5; the 1959-1960 and 1966-1975 CJ6; the 1976-1986 CJ7; the 1981-1985 Scrambler; the 1946-1949 Willys CJ-2; the 1949-1958 Willys CJ-3; the 1955-1958 Willys CJ-5; the 1956-1958 Willys CJ-6; and the 1941-1942 Willys MB.
The manufacturer fitment list for part 16710.01 covers: 1959–1960, 1966 Jeep CJ3; 1959–1960, 1966–1983 Jeep CJ5; 1959–1960, 1966–1975 Jeep CJ6; 1976–1986 Jeep CJ7; 1981–1985 Jeep Scrambler; 1946–1949 Jeep Willys CJ-2; 1949–1958 Jeep Willys CJ-3; 1955–1958 Jeep Willys CJ-5; 1956–1958 Jeep Willys CJ-6; 1941–1942 Willys MB.
Not listed: the Wrangler (YJ, TJ, JK) and any CJ outside the years shown. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The washer nub must sit in the spindle slot before the nut is tightened. Check the bearing retainer and lock arrangement on your axle, since those parts are separate from this kit.
What’s included
- Spindle washer with nub for the spindle slot
- Spindle nut
Not included: a lock, retainer or bearings, which must be sourced separately.









