Overview
The Crown Automotive 6506454AA is a front axle shaft nut that fits either the front driver side or passenger side. Crown Automotive presents it as a replacement part for Jeep vehicles, and the product carries a Direct Fit label.
No vehicle years, models or trims are stated, so the front axle position is the main fitment detail available.
Key features
- Fits front driver or passenger side
- Replacement axle shaft nut for Jeep applications
- Direct Fit label
- Crown Automotive part number 6506454AA
Front axle nut care
The front axle shaft nut holds the shaft at the hub, so it carries load each time the wheel turns and the vehicle moves over bumps. Its threads and seating face need to be clean and undamaged to hold the preload that keeps the shaft in position. A worn or corroded nut can loosen over time and cause vibration or noise at the hub.
Check the nut threads and face when the hub is serviced, and replace any nut that shows stretching, nicks or corrosion. Hub and axle designs vary, so confirm the nut matches your front axle before fitting. After the first drives, recheck tightness and look for movement at the hub, since new hardware can settle.
- Inspect threads and seating face when the hub is off
- Recheck tightness after the first drives
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 6506454AA |
| UPC | 849603003779 |
| Position | Front, driver or passenger side |
| Fitment label | Direct Fit |
Vehicle fitment
Front driver and passenger side placement is the only position covered. Vehicle years, models and trims are unknown, so match the nut to your front axle hub design.
Check your front axle and hub design against the nut before fitting. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the quantity and any washers against your installation before starting.









