Overview
The Trail Gear Spindle Nut Kit (part 140424-1-KIT) is a replacement hardware set for the wheel bearing retainer nuts on a front Toyota 8-inch axle. It is a one-side kit containing 2 spindle nuts, a star washer and a flat index washer for one side of the axle.
Use it when the original retainer nuts need replacing. No vehicle models or model years are stated, so match the axle size and location to your own axle before ordering.
Key features
- Replacement wheel bearing retainer nuts, 2 per kit
- Includes a star washer and a flat index washer
- Covers one side of the axle
- Made for a front Toyota 8-inch axle
Checking your retainer nuts
Wheel bearing retainer nuts hold the bearing in place and set its preload, so they carry load every time the wheel turns. When a set is worn, the threads can strip or the nut can loosen, which often shows up as wheel play or a slight growl from the hub. Check the nuts and washers together each time the hub is opened.
On a front Toyota axle, the star washer and index washer work as a pair to lock the nut. Replace them as a set when the nut is replaced, and keep the index washer tabs lined up with the nut flats during assembly. Clean the spindle threads before fitting new hardware so the nut seats square.
- Replace the nut and washers as a set
- Check the spindle threads for wear
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 140424-1-KIT |
| UPC | 70000621552 |
| Axle location | Front |
| Axle type | Toyota 8 Inches |
| Included hardware | 2 nuts, star washer, flat index washer (one side) |
Vehicle fitment
It is identified by axle location and type rather than by vehicle model or year. It is made for the front Toyota 8-inch axle. Confirm the axle size before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit contains 2 nuts, a star washer and a flat index washer for one side of the axle.









