Overview
The Dorman 615-149 is a spindle nut retainer with an M24-1.5 thread and a 36mm hex. It fits Jeep Cherokee (XJ), Comanche, Grand Cherokee (WJ and ZJ) and Wrangler (LJ, TJ and YJ) models, and it is a direct fit.
A spindle nut retainer holds the spindle nut from backing off, which keeps the wheel bearing adjustment from changing. Dorman says its retainers are coated for high corrosion resistance and a long service life.
A kit with the nut, washer and retainer is available for some applications. This part is the retainer alone.
Key features
- Spindle nut retainer
- M24-1.5 thread, 36mm hex size
- Coated for high corrosion resistance.
- Direct fit.
- Fits XJ, Comanche, WJ, ZJ, LJ, TJ and YJ models.
Before you install
The spindle nut sets bearing preload, and the retainer keeps it from loosening over time. Loose preload can cause wheel wobble, bearing noise and premature wear. Before fitting a retainer, clean the spindle threads and check for damage, since a damaged thread can make the nut look tight while the preload is wrong.
Hubs on older Jeeps often see water and road grit, so the retainer’s coating matters over the years. Look for pitting, cracks or a bent tab when inspecting the parts during a wheel bearing service. Replace the nut and washer together with the retainer if they are worn, because a mismatched set can fail to hold the adjustment.
- Clean the spindle threads before assembly
- Check bearing play after adjustment
- Recheck the nut after the first drives
Specifications
| Brand | Dorman |
|---|---|
| Part number | 615-149 |
| UPC | 19495617525 |
| _pn | 615-149 |
| Part type | Spindle nut retainer |
| Thread | M24-1.5 |
| Hex size | 36mm |
| Coating | Corrosion-resistant coating |
| Fit type | Direct fit (Dorman) |
Compare the material and weight with your existing retainer before installing.
Vehicle fitment
The Cherokee (XJ) fits 1984 to 2001, and the Wrangler (YJ) fits 1987 to 1995. Seven Jeep model lines are covered, each with its own years.
The manufacturer fitment list for part 615-149 covers: 1984–2001 Jeep Cherokee (XJ); 1986–1992 Jeep Comanche; 1999–2004 Jeep Grand Cherokee (WJ); 1993–1998 Jeep Grand Cherokee (ZJ); 2004–2006 Jeep Wrangler (LJ); 1997–2006 Jeep Wrangler (TJ); 1987–1995 Jeep Wrangler (YJ).
Not listed: Wrangler (JK) and Wrangler (JL), the Wrangler (TJ) is covered only through its 1997-2006 span, and no other make is listed. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The retainer works with the spindle nut and washer, which Dorman sells separately or in a kit. Match the M24-1.5 thread and 36mm hex to your parts before installing.
What’s included
- One spindle nut retainer, 615-149
Not included: the spindle nut and washer, which are separate parts or a separate kit.












