Select your vehicle

Crown Automotive Dana 30 TJ/XJ/YJ/ZJ Front Outer Stub Axle Shaft With ABS – 4713190

Crown Automotive

$98.49In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 19, 2026 1:40 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 1989–2006 Jeep XJ Cherokee and YJ, TJ, LJ Wrangler
  • Dana 30 front outer stub axle shaft with ABS
  • 27 splines

Description

Overview

The Crown Automotive 4713190 is a Dana 30 front outer stub axle shaft with ABS for 1989–2006 Jeep Cherokee XJ and Wrangler YJ, TJ and LJ models. A stub axle shaft is the short shaft at the wheel end of a front axle, and the 4713190 is Crown Automotive’s version for Dana 30 front axles built with ABS. It is listed in the front outer position with 27 splines.

The 4713190 is the Dana 30 version built with ABS, so choose it when your front axle uses ABS components; a non-ABS stub axle is a different part number. It is a direct fit across the vehicles below. The shaft is typically replaced when a front wheel end has worn or an outer shaft has been damaged off-road. Confirm the correct side for your vehicle before ordering a pair.

Key features

  • Front outer stub axle shaft
  • For Dana 30 front axles with ABS
  • 27 splines
  • Axle type given as Dana 30 TJ
  • Classed by Crown Automotive as a direct fit

Front wheel end checks

A stub axle shaft carries drive torque from the differential to the hub on a front axle. The splines at each end wear with use, and a worn spline can cause clicking, vibration, or a slipping feel during turns. The boot or seal at the inner end protects the joint and should stay intact to keep grease in and dirt out.

Before fitting a new shaft, inspect the hub, bearings, and the spline fit on the differential side. A shaft that is bent from an off-road impact can cause vibration at speed, so check runout if the old shaft was damaged. Clean the splines and apply the lubricant called for in the service manual before assembly. Replacing the wheel end seal at the same time avoids a repeat job.

  • Clicking on turns from worn splines
  • Vibration from a bent shaft
  • Grease leaking from the inner boot
  • Play in the hub or bearings

Specifications

Brand Crown Automotive
Part number 4713190
UPC 848399006414
Shaft location Outer Stub
Axle type Dana 30 TJ
Position Front Outer
Axle manufacturer Dana
Axle position Front
Spline count 27 Splines
ABS With ABS

Vehicle fitment

The 4713190 fits four Jeep groups.

  • 1989–2001 Jeep Cherokee (XJ) (Base, Briarwood, Classic, Country, Laredo, Limited, Pioneer, SE, Sport)
  • 2004–2005 Jeep Wrangler (LJ) (Unlimited)
  • 1997–2006 Jeep Wrangler (TJ) (SE, Sahara, Sport, X)
  • 1993–1995 Jeep Wrangler (YJ) (Base, Renegade, Rio Grande, SE, Sahara)

The XJ Cherokee, YJ Wrangler, TJ Wrangler and LJ Wrangler are covered for the years above. Grand Cherokee, Comanche and JK Wrangler models are not in the list. Confirm your vehicle’s year, model and trim before ordering.

SKU: CRO4713190 Category:

Specification

Shipping weight 3.16 lbs
Package dimensions 5.00 × 5.00 × 3.50 in
brands

Fitment

VehicleYearsTrims
Jeep Cherokee (XJ)1989–2001Base, Briarwood, Classic, Country, Laredo, Limited, Pioneer, SE, Sport
Jeep Wrangler (LJ)2004–2005Unlimited
Jeep Wrangler (TJ)1997–2006SE, Sahara, Sport, X
Jeep Wrangler (YJ)1993–1995Base, Renegade, Rio Grande, SE, Sahara

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which Jeeps does the Crown 4713190 fit?

It fits the 1989–2001 Cherokee XJ, the 1993–1995 Wrangler YJ, the 1997–2006 Wrangler TJ and the 2004–2005 Wrangler LJ Unlimited, all for the Dana 30 front axle.

Is the 4713190 for vehicles with ABS?

Yes. The title and notes name it as the version with ABS, so it is intended for front axles built with the ABS arrangement.

How many splines does the 4713190 have?

27 splines. It is a front outer stub axle shaft for the Dana 30, so a different front axle with another spline count would need a different part.

What should I check on the other side when replacing one stub axle shaft?

Inspect the other shaft's splines for wear, check its boot or seal for leaks, and feel for play in the hub and bearing. Replacing both shafts together can keep the drivetrain matched when both show wear.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon