Overview
The Crown Automotive J8136616 is a Dana 30 front axle shaft universal joint with a greasable design. It fits 1984-1999 Jeep Cherokee (XJ), 1976-1983 CJ5, 1976-1986 CJ7, 1981-1985 Scrambler and 1987-1995 Wrangler (YJ).
This Dana 30 axle shaft U-joint connects the axle shaft to the wheel end on the front axle, and is supplied per axle shaft. Crown Automotive describes itself as a manufacturer and distributor of replacement parts for Jeep vehicles. The joint is highway rated and lubeable, so it can be greased as part of regular maintenance.
Key features
- Dana 30 axle shaft universal joint, sold per axle shaft
- Greasable (lubeable) style for routine maintenance
- Highway rated
- Cup size of 1.188 inches
- Snap ring to snap ring size of 2.188 inches
- Position: front driveshaft at front axle
- Direct fit replacement part
Signs of joint wear
A universal joint transfers rotation through an angle, which lets the axle shaft move with the suspension and steering. Over time the bearing cups wear, and the joint develops play that can be felt as a clunk when shifting between drive and coast or as a vibration at speed. Greasing the joint on schedule slows that wear.
When inspecting, grab the axle shaft and check for movement in the joint, then look for grease leaking from the seals. Match the cup size to the joint you are replacing, and make sure the snap ring grooves are clean. Because the joint sits in a driveline that carries load, replace worn joints rather than running them until they fail.
- Feel for play in the joint
- Look for grease leaking from the seals
- Check for clunks when shifting
- Match the cup size to the old joint
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J8136616 |
| UPC | 848399072600 |
| Product type | Dana 30 axle shaft universal joint (U-joint) |
| Quantity | Per axle shaft |
| Style | Greasable |
| Cup size | 1.188 inches |
| Snap ring to snap ring size | 2.188 inches |
| Lubeable | Yes |
| Highway rated | Yes |
| Position | Front driveshaft at front axle |
| Fitment type | Direct fit |
Vehicle fitment
It fits 1984-1999 Jeep Cherokee (XJ), 1976-1983 CJ5, 1976-1986 CJ7, 1981-1985 Scrambler and 1987-1995 Wrangler (YJ). Trims for each model are shown on the Fitment tab.
The list does not include the Jeep Wrangler (TJ), the Cherokee after 1999, or the Jeep CJ5 after 1983. Dana 30 alone does not confirm fitment, so check the cup size and your vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Axle and driveline parts are safety-critical, so professional installation is recommended. Use the correct hardware, torque fasteners to their specified values, and re-check fasteners and fluid levels after the first miles of driving.
What’s included
One Dana 30 axle shaft universal joint, part number J8136616, sold per axle shaft.
Not included: Additional joints for the other axle shaft, axle shafts, and grease.















