Overview
The Jeep 4137757 is a factory replacement front axle U-joint (universal joint) for the 2007–2017 Jeep Wrangler JK, covering both 2-door and 4-door Unlimited models with the Dana 30 front axle. It is a direct-fit part sold under the Jeep name.
A front axle U-joint joins the inner axle shaft to the outer shaft at the steering knuckle, so the front wheels can turn while the axle is driving them. Because 4137757 is a factory replacement, a worn joint in a Dana 30 front axle can be renewed with a part made to the original design rather than an aftermarket variation.
It fits every Wrangler JK trim, from Sport and X up to Rubicon and the anniversary editions, across the whole 2007 to 2017 range.
Owners often look for this part number when a clicking or binding noise shows up in a front axle on turns, because the U-joint is a wear item on any steered, driven axle. Matching the Jeep part number and the Dana 30 axle designation gives a clear way to confirm the replacement before the axle is disassembled.
Key features
- Factory replacement part from Jeep
- Front axle U-joint for the Dana 30 front axle
- Fits 2007 to 2017 Wrangler JK and Wrangler Unlimited
- Covers 2-door and 4-door models
- Direct fit, with no modification mentioned
- Part number 4137757
Front U-joint wear and boots
A front axle U-joint works through a wide range of angles every time the wheel steers and the axle drives. Wear shows up first as play or a clicking sound when turning from a stop, and it often gets worse under power. Because the joint is a wear item, it makes sense to inspect the boot, grease and joint movement at the same time as any other front axle work.
Grease loss and torn boots are the usual causes of early failure, since dirt and water get into the bearing surfaces. When you inspect, look for cracks in the boot, grease on the outside of the joint and any lateral play. Replacing the joint along with a worn boot or nearby seal avoids repeat trips to the trail.
- Listen for clicking on tight turns
- Check the boot for cracks and grease loss
- Feel for play with the wheel off the ground
- Inspect nearby seals while the axle is open
Specifications
| Brand | Jeep |
|---|---|
| Part number | 4137757 |
| UPC | 4137757 |
| Part type | Front axle U-joint (universal joint) |
| Axle | Dana 30 front axle |
| Body styles | 2-door and 4-door models |
| Model years | 2007 to 2017 |
| Fitment type | Direct fit |
| Category | Axle parts, front axle U-joints |
Vehicle fitment
It fits the 2007–2017 Jeep Wrangler (JK) in these trims: 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X.
- 2007–2017 Jeep Wrangler (JK) (70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X)
It fits the 2007–2017 Wrangler JK only. It does not fit the 1997–2006 Wrangler TJ, the 2018 and newer Wrangler JL or the Gladiator. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This U-joint belongs in a Dana 30 front axle, so check that your Wrangler JK has a Dana 30 up front before replacing it. It is a direct-fit factory replacement.









