Select your vehicle
-13%

California Supertrucks 2.5 Inch Coil Spring Spacer Lift Kit – CSE-C16-4

California Super Trucks

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 2.5 inch front spring spacer kit
  • Urethane, 2 pieces
  • Comes with installation instructions

Description

Overview

The California Super Trucks CSE-C16-4 is a 2.5 inch front spring spacer kit made of urethane. It comes in two pieces and includes complete installation instructions. Verify that your vehicle’s year, model and trim suit the kit before ordering.

Key features

  • 2.5 inch lift height
  • Front position
  • Urethane construction

Urethane spacers and ride quality

Urethane spacers sit between the coil spring and its seat and carry the vehicle’s weight through the material rather than through a metal part. Urethane tends to be firmer than rubber, so the ride may feel a little stiffer over rough ground, and it holds its shape under repeated compression. Its suitability depends on how it is loaded and how the front suspension is set up.

Because the front rises, check the upper and lower control arm angles, the steering linkage and the tie rod ends after installation. Front spacers are often installed with a new alignment and sometimes with longer brake lines. Inspect the spacers for cracking, flattening or discoloration every few oil changes, and replace any piece that shows damage.

Specifications

Brand California Super Trucks
UPC 70000577304
Lift height 2.5 inches
Position Front
Material Urethane
Pieces 2
Installation Direct Fit

Vehicle fitment

Confirm the year, model and trim before you order the kit. Check the spacers against your existing front springs before installing them.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

Two urethane spring spacers and complete installation instructions.

SKU: CSTCSE-C16-4 Category:

Specification

Shipping weight 4.00 lbs
Package dimensions 12.00 × 8.00 × 7.00 in
brands

Questions & Answers

What is the California Super Trucks CSE-C16-4?

It is a 2.5 inch front spring spacer kit made of urethane, with two pieces and complete installation instructions. Its UPC is 70000577304, so use that number when ordering.

Does the CSE-C16-4 fit my vehicle?

Check your vehicle's year, model and trim against the kit before fitting, and compare the 2.5 inch front spacer with your suspension height and tire clearance.

What comes in the box with the CSE-C16-4?

The kit includes two urethane spacers and complete installation instructions. Confirm the contents when the kit arrives, before any work starts.

How do I know whether urethane spacers are worn?

Look for cracks, flattening, crumbling edges or a shift in position on the spring seat. A spacer showing these signs should be replaced before the front is run on rough ground.

Are urethane spacers worse than rubber for ride quality?

Not necessarily. Urethane usually rides firmer than rubber, but ride quality also depends on the coil springs, shocks and tires on the vehicle. Test the setup on the road after installing to judge the change.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon