Overview
The Skyjacker G250MSB is a 2.5 in. suspension lift kit for the 2020–2026 Jeep Gladiator. It uses 2.5 in. metal coil spacers at the front, 1 in. rear spacers and front shock extensions, so the lift is made with spacers rather than new springs or shocks.
It fits the Gladiator Overland, Rubicon, Sport and Sport S versions. No front or rear shocks are included, so the existing shocks need to be checked against the new ride height.
Key features
- 2.5 in. front metal coil spacers
- 1 in. rear spacers
- Front shock extensions
- Direct fit for the listed 2020–2026 Gladiator models
- Spacer lift rather than a full spring and shock package
Shock length and ride height
Raising the suspension with spacers changes where the shock sits, so the existing shock may run at a different angle or stroke than it did at stock height. Shock length and mounting points matter more after a spacer lift than on a stock truck. Look for shocks that have run out of travel at full droop or full compression, since a spacer lift can use up the remaining range.
Rear and front spacers also change the geometry of the control arms and the driveline. Recheck the ride height at each corner after the first few drives, because springs settle and the front and rear may end up at different heights.
- Check shock stroke at full droop and full compression
- Inspect brake lines and sway bar links for stretch
- Recheck torque on all fasteners after the first drive
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYG250MSB |
| Lift kit | 2.5 in. suspension lift |
| Front lift component | 2.5 in. metal coil spacers with shock extensions |
| Rear lift component | 1 in. spacer |
| Front shocks | None included |
| Rear shocks | None included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2020–2026 Jeep Gladiator in the Overland, Rubicon, Sport and Sport S versions.
The list covers the Gladiator only, so the Wrangler JL and JK are not included, and neither are Gladiator years before 2020. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Spacers raise the suspension without changing the springs, and the front shock extensions are part of the kit. Have the alignment checked after installation, and measure the driveline angles because a 2.5 in. front lift changes them.
What’s included
The kit includes front metal coil spacers, a 1 in. rear spacer and front shock extensions.
Not included: front and rear shock absorbers.








