Overview
The Crown Automotive 52059885AF is a rubber brake hose for the driver side rear of the 2007–2018 Jeep Wrangler (JK), in 2-door and 4-door models. It is at the rear left position.
Key features
- Rear left (driver side) position
- For 2-door and 4-door models
- Rubber hose
- Stock length
- Direct-fit replacement
Brake hose inspection
A brake hose carries fluid from the steel brake line to the wheel caliper, so it has to flex with suspension travel while holding pressure. Rubber hoses are common on the Wrangler because they absorb that movement, but the rubber ages from heat, road grime and ozone. Replace a hose that shows cracks, bulges, leaks at the fittings or a soft feel when the brake pedal is pressed.
Because the rear hose is part of the braking system, inspect the brake fluid, rear brake parts and the line connections when you replace it. Bleed the brakes after the swap so no air remains in the line, and check that the hose does not twist or rub against the frame, spring or suspension parts at full travel. Keep the fittings clean and torque them carefully, since a stripped or cross-threaded fitting can leak under pressure.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52059885AF |
| UPC | 848399038538 |
| Position | Rear left (driver side) |
| Type | Rubber |
| Length | Stock |
| Size | 0 inches to 2 inches |
| Fit | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK), both 2-door and 4-door.
The position is rear left, so confirm you need a rear hose before ordering. The TJ and JL Wranglers are not covered. Confirm the year, model and trim suit your vehicle first.








