Overview
The California Super Trucks CSS-C24-16 is a Gen III front tie rod kit for 2011–2018 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD trucks. It is approved for stock height or lifted applications and has a center section one inch thicker than original equipment (O.E.).
The center section is CNC machined from a solid piece of 1 3/8 inch 17-4 stainless steel, and the forged ends carry a manganese phosphate coating for weather resistance. Extra travel in the inner and outer joints is designed to prevent binding on lifted trucks. The kit is designed in the U.S.A. to ISO 9001/QS9000 and ISO/TS16949 standards.
Key features
- Heavy duty center section, CNC machined from a solid piece of 1 3/8 inch 17-4 stainless steel
- Center section 1 inch thicker than O.E.
- Forged ends with manganese phosphate coating for weather resistance
- Extra travel in the inner and outer joints to prevent bind on lifted applications
- Over-sized 3/4 inch threaded adjuster
- Greasable outer tie-rod end and pre-greased inner tie-rod end
- Replaceable inner and outer ends to reduce maintenance costs
- Neoprene boots keep the pivots clean and dry
- Designed in the U.S.A. to ISO 9001/QS9000 and ISO/TS16949 standards
Tie rods on lifted trucks
On a lifted truck the tie rods run at a steeper angle and carry more load through the steering geometry. A heavier center section and joints with extra travel help keep the linkage from binding as the suspension moves through its range. Any change in ride height also changes toe, so the alignment should be rechecked after the kit is installed.
The drag link, pitman arm and steering stabilizer work with the tie rods, and they are often inspected at the same time. Worn parts in that chain can make a new tie rod kit feel loose, so checking for play at every joint is good practice before a lift is driven hard off road.
An adjuster that threads smoothly makes toe setting easier. Lubricate the greasable joints as the service schedule calls for, and inspect the neoprene boots for splits, since dirt in a joint speeds up wear.
- Check the drag link ends for play
- Confirm the adjuster locks firmly after toe is set
- Look for rubbing between the tie rods and the frame or wheel
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSS-C24-16 |
| UPC | 700007534271 |
| Position | Front |
| Fitment type | Direct fit |
| Center section | Solid 1 3/8 inch 17-4 stainless steel, CNC machined, 1 inch thicker than O.E. |
| Ends | Forged, manganese phosphate coated |
| Adjuster | Over-sized 3/4 inch threaded |
| Lubrication | Outer end greasable, inner end pre-greased |
| Boots | Neoprene |
| Standards | ISO 9001/QS9000, ISO/TS16949 |
Vehicle fitment
It fits 2011–2018 Chevrolet Silverado 2500 HD and 3500 HD trucks in High Country, LT, LTZ and WT trims, and GMC Sierra 2500 HD and 3500 HD trucks in Base, Denali, SLE, SLT and WT trims. It is a direct fit for these trucks.
1500-series Silverado and Sierra trucks, and model years outside 2011–2018, are not covered. Confirm fit for your vehicle’s year, model and trim before buying.
What’s included
The kit is a tie rod assembly with a center section, forged inner and outer tie-rod ends, and neoprene boots. Check the package against your installation plan before starting.













