Overview
It is a front right outer tie rod end with a left hand thread. It fits a run of Jeep CJ and Willys models, including the CJ5, CJ7 and Scrambler.
Thread direction is the detail to get right on this part. The left hand thread should be compared against the end you are replacing before ordering, because the position is front right outer.
Key features
- Front right outer position
- Left hand thread
- Thread direction check recommended before ordering
- Direct fit listing covering ten Jeep and Willys entries
Checking thread direction at home
Thread direction is easy to confirm before the job starts. Remove the old tie rod end and look at the threads on the sleeve. A left hand thread tightens when turned counterclockwise. Comparing the old and new ends side by side avoids a costly mistake, since a mismatch will not thread on correctly.
On a CJ the tie rod is part of a longer steering linkage that includes the drag link and steering arm. Those parts age together, so look for slop in the drag link ends and the steering arm bushings while the tie rod is out. Once the new end is installed, set toe with the steering centered.
- Turn the old end to find thread direction
- Compare both ends before installing
- Check the drag link for play
- Center the steering before setting toe
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 18043.03 |
| UPC | 804314048884 |
| Position | Front right outer |
| Thread direction | Left hand |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1959-1960 and 1966 Jeep CJ3, the 1959-1960 and 1966-1983 Jeep CJ5, the 1959-1960 and 1966-1975 Jeep CJ6, the 1976-1986 Jeep CJ7, the 1981-1985 Jeep Scrambler, the 1946-1949 Willys CJ-2, the 1949-1958 Willys CJ-3, the 1955-1958 Willys CJ-5, the 1956-1958 Willys CJ-6 and the 1941-1942 Willys MB.
Models such as the Cherokee (XJ) and Wrangler (YJ) are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the removed end’s thread direction before threading the new one on, then have alignment set.
What’s included
One tie rod end, part number 18043.03.






















