Overview
These front brake hoses are stainless steel and are designed for lifted trucks, with capacity for up to a 6 inch lift. They are intended to support braking and are designed to resist swelling under hard braking.
The fitment is a direct fit for lifted applications in the 4 to 6 inch range. No make, model or model year is attached, so confirm the lift height before ordering.
Key features
- Stainless steel hose construction
- Designed to accommodate up to a 6 inch lift
- Listed lift range of 4 to 6 inches
- Labeled as a front position hose
- Designed to resist swelling under hard braking
Lift height and hose length
Brake hose length is set by the distance between the frame and the caliper, and a lift changes that distance. A lifted truck needs enough hose to reach the caliper through full suspension travel without pulling tight. Check the hose route with the suspension at full droop and at full compression, and make sure the hose does not rub on the tire, frame or steering parts.
Stainless steel lines are more resistant to expansion under pressure than rubber, which helps keep pedal feel firm. Brake lines should be inspected for chafing, kinks and seepage at each service. Replace any hose that shows cracking or bulging, and bleed the system after installation.
- Check clearance at full suspension travel
- Inspect fittings for seepage
- Bleed the brakes after the swap
Specifications
| Brand | California Super Trucks |
|---|---|
| UPC | 70000389057 |
| Material | Stainless steel |
| Position | Front |
| Lift accommodation | Up to 6 inches |
| Listed lift range | 4 to 6 inches |
| Fitment type | Direct fit, lifted |
Vehicle fitment
Its only vehicle detail is the 4 to 6 inch lifted range. Confirm your vehicle’s year, model and trim before ordering.
Stock-height vehicles fall outside the listed lift range. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Confirm the number of hoses and fittings in the set before installing.











