Overview
The Crown Automotive 52002848 is a rubber front brake hose for the passenger side of the 1987–1989 Jeep Wrangler (YJ). It is a direct-fit replacement listed at the front right position.
Key features
- Front right (passenger side) position
- Rubber hose
- Stock length
- Size class 0 inches to 2 inches
- Direct-fit replacement
Brake hose inspection
Flexible rubber brake hoses carry fluid to the caliper while allowing the wheel to move with the suspension. Over time the rubber can crack, swell or harden, and an aged hose may balloon under pressure, which softens the pedal feel. Because the hose is part of the hydraulic system, a leak or a weak section should be dealt with before the vehicle is driven normally.
When replacing a hose, check the banjo bolts, the sealing washers and the connection to the steel line. Avoid twisting the new hose during installation, and make sure it does not rub against the tire, suspension or frame at full steering lock. After any hydraulic work, bleed the brakes and test the pedal in a safe area before normal driving.
- Look for cracks, bulges or oil seepage on the hose
- Replace the sealing washers when the banjo bolts are removed
- Avoid twisting the hose during installation
- Bleed the brakes after replacing a hose
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52002848 |
| UPC | 848399012996 |
| Position | Front right (passenger side) |
| Type | Rubber |
| Length | Stock |
| Size | 0 inches to 2 inches |
| Fit | Direct fit |
Vehicle fitment
It fits the 1987–1989 Jeep Wrangler (YJ).
It is for the passenger side only. Confirm fit for your vehicle’s year, model and trim before ordering, especially for 1990–1995 YJ models.








