Overview
The Crown Automotive J0800953 is a 6 inch rubber front brake hose that runs to the steering knuckle on early Jeep CJ and Willys models. It is a direct-fit replacement at stock length.
Key features
- 6 inch hose
- Runs from the front brake line to the steering knuckle
- Rubber
- Stock length
- Direct-fit replacement
Brake hose inspection
A front brake hose carries fluid from the steel line to the caliper or wheel cylinder, flexing with steering and suspension movement. Rubber hoses can crack, swell or soften over time, and a damaged hose may leak or fail under pressure. Inspect it for cracks, bulges, chafing against the knuckle or chassis, and fluid seepage at the fittings.
Because the hose moves when the wheel turns, check that it does not twist or rub on nearby parts after installation. Use new sealing washers where the fitting calls for them, and avoid overtightening banjo or threaded connections. After replacing the hose, bleed the brake system and check the pedal feel before driving. Replace the hose in pairs when one side shows wear.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0800953 |
| UPC | 848399053395 |
| Type | Rubber |
| Hose length | 6 inch |
| Function | Front brake hose to steering knuckle |
| Length class | Stock |
| Size | 0 inches to 2 inches |
| Fit | Direct fit |
Vehicle fitment
It fits the 1959 Jeep CJ3, the 1959–1965 CJ5 and CJ6, the 1946–1949 Willys CJ-2, the 1949–1958 Willys CJ-3, the 1955–1958 Willys CJ-5, the 1956–1958 Willys CJ-6 and the 1941–1942 Willys MB.
The 1966 and later CJ5 and CJ6 are not covered by this hose. Confirm your vehicle’s year, model and trim before ordering.









