Overview
The California Super Trucks CSS-C12-3 is a ball joint taper sleeve that lets a larger taper spindle accept a smaller tapered ball joint. It is CNC machined and comes as a pair of two pieces, for builders working on performance axle components.
Key features
- CNC machined taper sleeve
- Adapts a big taper spindle to a smaller tapered ball joint
- Comes as a pair (2 pc.)
Taper fit and spindle sizes
A tapered ball joint seats into the spindle through a precise cone, and the fit between the two determines how well the joint carries load. When a larger spindle must take a smaller joint, a sleeve fills the gap so the joint is held firmly and does not rock. The sleeve has to match both tapers closely, or the joint can work loose under steering and braking loads.
Taper fit is checked by hand before the final tightening. Clean both tapers, seat the joint and confirm there is no play before torquing the nut. Because a loose joint can separate under load, recheck the assembly after the first drives and inspect the taper for scoring or cracking at each service.
- Clean both tapers before assembly
- Seat the joint fully before final tightening
- Check for play once the nut is torqued
- Inspect the sleeve for cracks at each service
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSS-C12-3 |
| UPC | 70000221943 |
| Quantity | 2 pc. |
Vehicle fitment
Confirm fit for your vehicle’s year, make, model, chassis and axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A pair (2 pc.) of taper sleeves.









