Overview
The Blue Torch Fabworks XML10-12 rod end, part BTFBTF13066, has a 5/8 in bore and a 3/4-16 left hand thread shank, with a Kevlar liner.
The static load rating is 40,572 LBS, and the thread is left hand. It is a universal fit part, but the bore and thread size decide which joints it works with, so measure before using it.
Key features
- 5/8 in bore
- 3/4-16 shank with left hand thread
- Kevlar liner
- Static load rating of 40,572 LBS
- Labeled universal fit; bore and thread size decide compatibility
Rod end basics and wear
A rod end lets a link move through an arc while the shank stays fixed to the bar or arm, which is why this type of joint shows up in steering, track bar and control arm linkage on off-road builds. The ball and housing carry the load at each joint, so the liner condition and the fit of the bore to the pin decide how smoothly the joint moves under flex.
Liners wear over time, and grit that works past the seal speeds that up. Check for play by moving the joint by hand, look for cracks around the housing, and inspect the threads for damage before threading the end into the bar. Once set, lock it with a jam nut and recheck the setting after the first few trail runs.
- Inspect the liner and seal for wear or tears
- Check thread condition before installation
- Recheck the jam nut after early trail use
Specifications
| Brand | Blue Torch Fabworks |
|---|---|
| Part number | BTFBTF13066 |
| Model | XML10-12 |
| Bore | 5/8 in |
| Shank | 3/4-16 |
| Thread direction | Left hand |
| Liner | Kevlar |
| Static load rating | 40,572 LBS |
Vehicle fitment
It is a universal fit part, and a rod end has to match your joint and thread. Check the joint dimensions against the bore and thread before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm that the 3/4-16 left hand thread matches the mating part before threading the rod end in. Check the 5/8 in bore against the joint it connects to.
What’s included
The rod end only. Check the package contents against your installation before starting, including any jam nut you need.









