Overview
The Black Rhino Excursion wheel, part number TSW1775ECN356140M12, is a 17×7.5 matte black aluminum wheel with a 6 on 5.5 bolt pattern, a 35 offset and 5.63 backspacing.
Black Rhino builds its truck and SUV wheels with two setups in mind. One uses a negative offset for a truck or SUV with an extreme lift and an aggressive stance. The other uses a more positive offset that suits a mild lift or a stock-looking vehicle. This wheel has a 35 offset.
Key features
- Excursion style in a matte black finish
- Aluminum construction
- 17 inch diameter and 7.5 inch width
- 6 on 5.5 bolt pattern
- Offset 35 and backspacing 5.63
- It is a universal fit wheel, defined by its size and bolt pattern rather than by any vehicle.
Offset and stance choices
Offset decides how far the wheel face sits from the hub and how far the tire pushes into the fender. A positive offset tucks the wheel in for a closer, stock-looking stance. A negative offset pushes it outward, which suits taller builds but reduces clearance to suspension parts and calipers. Backspacing shows how much room sits behind the mounting face, so it matters when the brake or suspension layout changes. Measure your current clearance before changing wheels, and check it again after any lift or larger tire.
Tire choice follows wheel width. A 7.5 inch wide wheel works with a range of tire sizes, and the tire has to be sized to the wheel’s rim. Larger tires add load to wheel bearings and steering components, so inspect those parts after a new setup goes on and after rough use. Aluminum wheels can crack or bend when they hit rocks, so look at the lip and bead area after trail runs.
- Confirm offset before choosing a lift
- Re-check clearance after any suspension change
- Inspect lips and beads after rough trail use
Specifications
| Brand | Black Rhino Wheels |
|---|---|
| Part number | TSW1775ECN356140M12 (1775ECN356140M12) |
| Style | Excursion |
| Finish | Matte black |
| Construction | Aluminum |
| Wheel diameter | 17 inches |
| Wheel width | 7.5 inches |
| Bolt pattern | 6 on 5.5 |
| Offset | 35 (unit not stated) |
| Backspacing | 5.63 (unit not stated) |
| Fitment type listed | Universal fit |
Vehicle fitment
This is a universal fit wheel, so it is defined by size: 17×7.5 with a 6 on 5.5 bolt pattern, a 35 offset and 5.63 backspacing. Fit on a given vehicle depends on bolt pattern, brake caliper clearance, suspension clearance and tire size.
This wheel is not tied to any particular model. Offset and backspacing affect clearance against the suspension and body, so compare them with your vehicle. Confirm the year, model and trim against your truck or SUV before ordering.
Installation notes
Have wheels mounted and balanced by a qualified shop. Confirm bolt pattern, offset, backspacing and brake and suspension clearance before mounting, and use lug nuts or hardware suited to the wheel seat. Tighten lug nuts in a star pattern to the torque your vehicle requires and re-check after the first miles.
What’s included
One wheel is included.
Not included: Tires, lug nuts, center caps and valve stems are not included.











