Overview
The Bilstein 5100 Series 24-185653 is a front gas-charged monotube shock absorber for the 1987–1995 Jeep Wrangler (YJ). Bilstein markets the 5100 Series for lifted trucks, Jeeps and prerunners. This front unit has an eye lower mount, a stem upper mount, a 14mm shaft and a 46mm smooth, non-coilover body.
Collapsed length is 16.97 in and extended length is 28.44 in, giving 11.47 in of travel. Those are the figures to match against your current shock. The fitment is marked Direct Fit, and the shock comes with a boot.
Key features
- Single-tube body with gas pressure inside (monotube)
- Self-adjusting deflecting disc valving
- High-flow piston that Bilstein says reduces harshness
- Compression and rebound tuned independently
- Larger working piston area for damping control
- Designed for control with large-diameter tires.
- Boot included and zinc plated finish
Stock mounts and lift kits
A Wrangler YJ front end relies on the lower control arm and track geometry to keep the tires steady, and the shock adds damping on top of that. When a lift kit is installed, the shock’s mounting angles change, so the stock mounting layout matters more. Confirm the kit you plan to use keeps that layout before buying.
A stem upper mount and an eye lower mount are different hardware styles, so check both ends against the brackets on your vehicle. Keep the old unit on stands while removing it, and never force a stem into a bracket made for an eye.
- Confirm the lift kit keeps the stock mounting layout
- Inspect the bushings in the eye lower mount
- Check the stem upper mount for thread or stud damage
- Replace shocks in pairs for even damping
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-185653 |
| UPC | 651860596600 |
| Series | 5100 Series |
| Position | Front |
| Collapsed length | 16.97 in |
| Extended length | 28.44 in |
| Travel length | 11.47 in |
| Lower mount | Eye, 12.7mm |
| Upper mount | Stem |
| Shaft diameter | 14mm |
| Body design | 46mm ID smooth body, non-coilover |
| Internal design | Mono tube |
| Gas charged | Yes |
| Reservoir | No |
| Finish | Zinc plated |
| Boot | Included |
| Lift/Drop | 0 in. |
| Fitment type | Direct Fit |
Vehicle fitment
It fits the 1987–1995 Jeep Wrangler (YJ) in Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims. TJ, LJ and JK Wrangler generations are not covered by this part.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bilstein designed this shock for specific manufacturer lift kits that keep the stock O.E.M. mounting configuration, so confirm your kit uses it. Compare the 12.7mm eye lower mount and the stem upper mount with your existing shock before installing. Support the vehicle on stands while the old unit is removed.
What’s included
One Bilstein 5100 Series front shock absorber with its boot. Mounting hardware is not included.











