Select your vehicle

Bilstein 4600 Series Shock Absorber – 33-185859

Bilstein

$104.00In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 1:50 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Bilstein 4600 Series monotube shock, rear, part number BIL33-185859
  • Gas charged monotube with 2 inch body diameter, boots included and yellow finish
  • Fits 2000–2004 Dodge Dakota SLT, SLT Plus, Sport and Sport Plus models

Description

Overview

The Bilstein 4600 Series rear shock, part number BIL33-185859, is a gas charged monotube with a 2 inch body diameter, boots included and a yellow finish. It fits the 2000 to 2004 Dodge Dakota in SLT, SLT Plus, Sport and Sport Plus trim.

The monotube has no external reservoir. Bilstein says heat passes from the oil to the outer surface of the body, which allows the shock to dissipate heat more efficiently.

A dividing piston lets the oil expand as it warms, which prevents foaming and loss of viscosity and keeps full damping as temperatures rise. The piston head tunes compression and rebound separately for ride comfort and performance.

The seamless tube is formed by extrusion for tight tolerances and consistent wall thickness, which supports tube strength.

The rear position, 2 inch body diameter, yellow finish and boots are the physical features of this shock, so compare them with the shock being replaced.

Key features

  • Rear position
  • Gas charged monotube design
  • 2 inch body diameter
  • Boots included
  • No external reservoir
  • Yellow finish
  • Dividing piston and separate compression and rebound tuning

Rear shock replacement

Rear shocks help control axle movement, load and the rebound of the rear end after bumps. On a pickup, a worn rear shock can cause bounce when the bed is loaded and a loose feel on rough roads. Monotube designs like this one keep gas and oil in one tube with a dividing piston rather than using an external reservoir.

Before installing, check the boot condition, the length and the mounts against the rear springs. Rear shocks are usually replaced in pairs so the rear ride stays even. Keep the rod and body clean during installation, since grit on the rod can damage seals quickly. Inspect the bushings and brackets for wear while the shock is removed.

  • Check boots for cuts or tears
  • Compare shock length against the old unit
  • Replace rear shocks in pairs
  • Inspect rear bushings and brackets

Specifications

Brand Bilstein
Part number BIL33-185859
Shock series 4600 Series
Position Rear
Shock type Monotube, gas charged
Body diameter 2 inch
Reservoir None
Boots Included
Finish Yellow
Fitment Direct fit

Vehicle fitment

It fits 2000–2004 Dodge Dakota SLT, SLT Plus, Sport and Sport Plus trim.

The list does not include the Dakota from 1999 and earlier or 2005 onward, the Dodge Durango, or the Ram trucks. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Rear shocks are generally fitted in pairs. Check the length and mounts against the rear springs before installing, and make sure the boots are in place.

What’s included

The product is one rear monotube shock with boots, under part number BIL33-185859.

Fitment

VehicleYearsTrims
Dodge Dakota2000–2004SLT, SLT Plus, Sport, Sport Plus

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the BIL33-185859 fit a 2002 Dodge Dakota?

Yes. The list covers 2000 to 2004 Dodge Dakota models in SLT, SLT Plus, Sport and Sport Plus trim, so a 2002 model in one of those trims is listed. Confirm the trim before ordering.

Does this shock have a reservoir?

No. It is a monotube design with no external reservoir, so the oil and gas are contained in one tube body.

Are boots included?

Yes. The product is listed with boots included, which help keep dirt off the rod seal once the shock is installed.

Should I replace rear shocks with the springs?

Not always. Replace the springs only if they show sag, cracks or uneven height. Rear shocks can be replaced on their own, but matched pairs give a more even ride, so consider both sides together.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon