Overview
The Bilstein 4600 Series 24-185219 is a front gas-charged monotube shock absorber with boots, fitted to the 1997–2002 Ford Expedition and the 2001–2003 Ford F-150. It has a 2 in body diameter, a yellow finish and no reservoir, and it is a direct-fit replacement with a lift/drop of 0 in.
The 4600 Series is a patented monotube, gas-charged design. Its dividing piston lets the oil expand as heat builds, which helps prevent foaming and viscosity loss so the shock keeps its full damping as temperatures rise. The seamless tube is formed by a special extrusion method for tight wall consistency and long shock life. Front shocks control damping at the front axle, so this part is for the front position.
Key features
- Monotube gas-charged body; Bilstein says heat moves from the oil to the outer shock surface for better dissipation.
- Dividing piston allows the oil to expand as it heats, which Bilstein says reduces foaming and viscosity loss.
- Seamless monotube tube formed by a special extrusion method for tight peak-to-valley tolerance.
- Piston head tunes compression and rebound damping independently for ride comfort and control.
- Fewer parts than most conventional twin-tube designs.
- Front position with boots included.
Replacing a worn front shock
A worn front shock often shows up as a bouncy ride, nose dive under braking or a wandering steering feel at highway speed. Fitting a shock that controls both compression and rebound helps keep the tires in contact with the road over rough sections. Off-road use puts extra stress on mounts and bushings, so check those parts when a shock is replaced.
Choosing a replacement means confirming the position, body diameter and mount type first. Gas-charged bodies hold pressure, so avoid heat and cutting tools near the tube. After installation, re-check fasteners after the first few drives and look for leaks.
- Match body diameter and position to the old unit
- Check mounts and bushings for wear
- Keep boots clean and undamaged
- Inspect after rough trail or highway use
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-185219 |
| UPC | 651860421704 |
| Shock series | 4600 Series |
| Type | Monotube |
| Hydraulic / gas charged | Gas charged |
| Body diameter | 2 in |
| Finish | Yellow |
| Reservoir | No |
| Boots included | Yes |
| Position | Front |
| Fitment | Direct fit |
| Lift/drop | 0 in |
Vehicle fitment
It is fitted to the 1997–2002 Ford Expedition in Eddie Bauer and XLT trims, and to the 2001–2003 Ford F-150 in King Ranch, Lariat and XLT trims.
This part covers the years and trims above. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One Bilstein 4600 Series front shock absorber with boots.
Not included: No reservoir is included, as the shock has none. Check what mounting hardware your installation requires.









