Overview
The Bilstein 5100 Series Shock Absorber, part number 24-185622, is a front gas-charged monotube shock with a bar pin lower mount, a stem upper mount and a 14mm shaft. It is listed with a w/2 – 3 in. Lift rating, and its manufacturer fitment list is made up entirely of Jeep models.
Collapsed length is 13.58 in, extended length is 22.09 in and travel is 8.51 in. Those figures are what to compare when replacing an existing front shock or matching one to a lift.
Bilstein presents the 5100 Series as a single-tube, high gas pressure design. This front unit uses a 46mm ID smooth body, a non-coilover layout and a zinc plated finish, and its boot is included.
Key features
- Monotube gas pressure body
- Self-adjusting deflecting disc valving
- High-flow piston for reduced harshness
- Independent rebound and compression tuning
- Large working piston area for exact damping
Mount types and travel
Bar pin and stem mounts are different from the eye-style mounts found on many shocks, so the mount type should be checked before the shock is ordered. Travel is the distance the shock can move between its collapsed and extended positions, and it matters for how the suspension will flex. A front shock on a Jeep often works hard on uneven trails, so travel and damping should suit the way the vehicle is driven.
Front shocks often wear at the upper and lower mounts before the damping fades, so check bushings and brackets when replacing. Keep the boot intact and clean, since grit on the shaft shortens seal life. Replace shocks in pairs on the same axle so the front end handles evenly.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-185622 |
| UPC | 651860453798 |
| Series | 5100 Series |
| Position | Front |
| Collapsed length | 13.58 in |
| Extended length | 22.09 in |
| Travel | 8.51 in |
| Lower mount | Bar pin |
| Upper mount | Stem |
| Shaft diameter | 14mm |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Mono tube |
| Finish | Zinc plated |
| Reservoir | No |
| Boot | Included |
| Lift height | w/2 – 3 in. Lift |
| Charge | Gas charged |
| Fitment type | Direct Fit |
Vehicle fitment
It fits the Jeep Cherokee (XJ) 1984–2001, Jeep Comanche 1986–1992, Jeep Grand Cherokee (WJ) 1999–2004, Jeep Grand Cherokee (ZJ) 1993–1998, Jeep Grand Wagoneer (SJ) 1993 and Jeep Wagoneer (SJ) 1984–1990, with trims named for each entry.
The list does not include Wrangler YJ, TJ, LJ or JK models, Grand Cherokee models from 2005 onward, or Cherokee models after 2001. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stated lift height is w/2 – 3 in. Lift, so measure your current lift before fitting. The lower bar pin and upper stem mounts differ from eye-style mounts, so confirm your existing shock uses the same mount types before installation. Heating or piercing the pressurized body is unsafe.
What’s included
Front shock absorber with boot.












