Overview
The Bilstein 46mm Monotube Shock Absorber, part number 24-109369, is a Heavy Duty front shock from the 4600 Series. It fits the 2003–2009 Hummer H2 (Base). It is a gas-pressure monotube design for full-size sedans, SUVs and trucks, aimed at a comfortable ride with firm handling.
A monotube shock keeps its oil and gas charge in a single tube, rather than in the separate tubes of a conventional twin-tube shock. This B6 Heavy Duty unit uses that layout for firm damping control. It has a yellow-painted steel body and is a direct fit with no lift or drop. Gas pressure helps the oil keep working as temperatures rise, so damping stays consistent on the road.
This unit fits the front position only, so a rear shock is a separate part. When matching a replacement, compare the 46mm body size, the front position and the 2003–2009 Hummer H2 (Base) fitment with the shock you are replacing.
Key features
- Heavy Duty B6 gas-pressure monotube construction
- 46mm monotube body for the front position
- Gas-charged design, which Bilstein says helps move heat from the oil to the shock body
- Direct fit with no lift or drop (0 in.)
- Yellow paint over a steel body
- Zinc plated finish.
- Designed for full-size sedans, SUVs and trucks.
Heavy Duty shock maintenance
Heavy-duty monotube shocks are used where extra damping control matters, such as trucks that carry loads or tow. The gas charge helps keep damping steady as the oil warms, which is why a worn unit tends to show a loss of control on longer runs rather than a sudden failure. Regular inspection of the body, seal and mounts catches that wear early.
Because this unit is for the front position, check the steering and front-end parts whenever you inspect it. A worn shock can accompany loose ball joints or worn bushings, so look at those too. Keep the mounting hardware tight after the first drives, and recheck it when tires are rotated or the vehicle is serviced.
- Check the seal and body for oil seepage
- Inspect front bushings and ball joints
- Recheck mounting hardware after the first drives
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-109369 |
| UPC | 651860661995 |
| Shock series | 4600 Series, Heavy Duty |
| Body size | 46mm monotube |
| Position | Front |
| Hydraulic / gas charged | Gas charged |
| Fitment type | Direct fit |
| Lift height | 0 in. lift or drop |
| Finish | Zinc plated; yellow paint |
| Body material | Steel |
| Previous part number | BILF4-BE5-A936-H1 |
Vehicle fitment
Fits the 2003–2009 Hummer H2 Base trim only. Other H2 trims and Hummer models are not covered.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The shock absorber described above, for the front position.
Not included: Mounting hardware and other accessories are not included.









