Overview
The Bilstein 24-024211 is a rear 4600 Series monotube shock absorber with a 2 in body diameter. It fits 1992–1999 Chevrolet and GMC K1500 Suburban models and the 1999–2000 Cadillac Escalade. It is gas charged, comes with boots, has no external reservoir, and is designed as a direct replacement damper to restore the original ride and control.
The monotube gas-charged body moves heat from the oil out to the shock’s outer surface, where it dissipates more efficiently. Inside, a dividing piston gives the oil room to expand as the shock warms, which limits aeration (foaming) and loss of viscosity so damping holds up as temperatures rise.
Key features
- Gas-charged monotube body on the 24-024211, designed to dissipate heat from the oil more efficiently.
- Dividing piston that allows the oil to expand as heat builds, helping prevent foaming.
- Tube produced by a special extrusion method, which Bilstein says gives a tight peak-to-valley tolerance and consistent wall thickness.
- Seamless monotube design that Bilstein describes as adding tube strength and maximizing heat dissipation.
- Piston head that lets compression and rebound damping be tuned independently for ride comfort.
- Fewer parts than most conventional twin tube and so-called road sensing designs.
- Boots included with the shock.
Care for the rear shock
On a full-size Suburban, the rear shocks control axle movement when the truck carries passengers, cargo or a hitch load. Damping that fades makes the back end float over swells and dip hard under braking. Gas charged monotube shocks keep the oil and gas separated by a piston, so their damping stays more even as the body warms during long highway runs.
Routine checks are simple. Look at the body for oil seepage, feel the mounts for play, and watch the boots for splits, since grit that reaches the shaft seal can shorten a shock’s life. Rear shocks are often replaced in pairs so the ride stays balanced side to side. Trucks used for towing may wear shocks faster, so inspect them more often. After any suspension work, check that the lower bolts are tight and that the boot is seated correctly.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-024211 |
| Bilstein reference | BIL24-024211 |
| UPC | 651860451336 |
| Shock series | 4600 Series |
| Type | Monotube, gas charged |
| Body diameter | 2 in |
| Position | Rear |
| Reservoir | No |
| Boots | Included |
| Finish | Yellow |
| Lift/drop | 0 in. |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1999–2000 Cadillac Escalade (Base), the 1992–1999 Chevrolet K1500 Suburban (Base, LS, LT, Silverado) and the 1992–1999 GMC K1500 Suburban (Base, SLE, SLT). The lift/drop value is 0 in.
Other model years of these Suburbans and the Escalade, and other GMC or Chevrolet models, are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear Bilstein 4600 Series shock absorber with boots included.









