Overview
The Bilstein 24-025027 is a rear 4600 Series shock absorber with a monotube, gas-charged body, a 2 in body diameter and a yellow finish. Its specifications list it as a direct-fit rear shock, but no vehicle years, makes, models or chassis codes are named for it, so the vehicles it suits cannot be confirmed from these details.
The monotube is gas-charged, and heat from the oil travels outward through the shock body so it can dissipate. A dividing piston gives the oil room to expand as it warms, which limits foaming and viscosity loss so the shock keeps its damping at higher temperatures. The design uses fewer parts than conventional twin-tube and road-sensing shocks. Check the boots, gas charge and body diameter against the old unit when comparing.
Key features
- Gas-charged monotube body moves heat out of the oil
- Dividing piston makes room for oil expansion as it warms
- Extruded tube held to tight peak-to-valley tolerance
- Seamless tube construction for strength and heat release
- Piston head tunable for compression and rebound separately
- Boots included; no reservoir
Rear shock swap tips
Rear shocks work hardest on rough roads, when they absorb repeated impacts and keep the tires in contact with the ground. Heat builds quickly during long descents or trail runs, and a shock that cannot shed heat loses damping. A gas-charged body helps keep the oil stable so the ride stays predictable on the way back down.
When swapping a rear shock, compare the eye style, the stroke and the mount positions with the old unit before the work starts. Replacing both rear shocks at once keeps the vehicle level and handling even. Old bushings can flatten or crack, so inspect them and replace any that look worn before fitting the new shock.
- Compare mount positions with the old shock
- Keep boots clean during fitting
- Check bump stops for cracks or flattening
- Recheck bolts after the first few drives
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-025027 |
| UPC | 65186045134 |
| Series | 4600 Series |
| Position | Rear |
| Shock type | Monotube |
| Charge | Gas charged |
| Body diameter | 2 in |
| Reservoir | No |
| Finish | Yellow |
| Boots | Included |
| Lift height | w/0 in. Lift/Drop |
| Mounting type | Direct Fit |
Vehicle fitment
Fitment for part number 24-025027 is not confirmed for any vehicle, so the models it suits must be verified before buying. The only height information is w/0 in. Lift/Drop. Compare the shock’s length and mounting points with the shock it will replace.
Confirm fit for your vehicle’s year, model and trim before ordering, and match the mounting points to your old shock.
What’s included
The package is a rear shock absorber with boots. Check the package contents against your installation before starting.
Not included: mounting hardware and any brackets, to be checked against your installation









