Overview
The Skyjacker TJ40R is a set of two rear Softride coil springs for a 4 in. lift. It is a direct fit part with a rear lift height of 4 in. Coil springs are a suspension component, so the lift also needs the separate shock mount and lift kit component named below to complete the installation.
Key features
- Softride coil spring design
- Sold as a set of 2 rear springs
- Built for a 4 in. rear lift
- Requires a Coil Over Shock Absorber Mount, part number SKTJB1
Planning a rear lift
Rear coil springs carry the weight of the rear axle and set rear ride height. A lift changes the angle of the driveshaft and the length of the brake lines and sway bar links, so those parts need a look once the new springs are in. Plan the work so the shock mount, lift component and springs are all on hand before the truck goes up on stands.
Rear springs are normally replaced as a pair, and a new set often shows its real height only after the truck is loaded and driven for a short time. Recheck the bolts on the mount after the first few drives. Inspect the rubber isolators at each service, since cracked rubber can allow the spring to shift.
- Have the shock mount and lift component ready before starting
- Check brake lines and sway bar links after the lift
- Inspect driveline angles and u-joints
- Recheck mount bolts after the first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | TJ40R |
| UPC | 803696163598 |
| Product type | Coil spring |
| Quantity | Set of 2 |
| Position | Rear |
| Lift height | 4 in. |
Vehicle fitment
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This set needs two separate parts: a Coil Over Shock Absorber Mount (PN SKTJB1) and a lift kit suspension component (PN TJ401, TJ401-DX, TJ401-SVX or TJ40RR-DX). Confirm you have both before starting. After a 4 in. lift is installed, have the alignment checked and the driveline angles inspected.
What’s included
Set of 2 rear Softride coil springs.
Not included: the Coil Over Shock Absorber Mount (PN SKTJB1) and the lift kit suspension component, which are required separately.




