Overview
The Bilstein 199021 is a rear coil spring that replaces the factory air ride spring on the 2000–2006 Chevrolet Tahoe, 2000–2006 GMC Yukon and 2002–2006 Cadillac Escalade. Bilstein designs it as an OEM replacement that swaps air suspension for a conventional coil spring setup.
The spring is made from steel wire and heat-treated to precise specifications for durability and consistency. Paired with an appropriate Bilstein shock, it converts air leveling Nivomat vehicles to standard suspension.
Key features
- Rear position coil spring with direct fit design
- OEM-style replacement for factory air ride springs
- Steel wire heat-treated to precise specifications
- Converts air leveling Nivomat vehicles to standard suspension when used with an appropriate Bilstein shock
Choosing the matching shock
The shock matters because the air leveling system is replaced by a conventional damping setup. An appropriate Bilstein shock sized for the new spring keeps the rear controlled as the coil takes the load. Mismatched shocks can cause bounce, wallow or early wear in the rear mounts.
Before buying, confirm the shock fits your model year and trim, then plan the swap so both rear corners change together. Coil conversions often prompt a check of the rear control arms, bushings and bump stops, since they carry different loads in the new setup. A written checklist helps keep the work in order.
- Match the shock to the model year and trim
- Replace both sides at the same time
- Inspect rear bushings and bump stops
- Check ride height after the first drive
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 199021 |
| UPC | 651860714271 |
| Position | Rear |
| Fitment type | Direct fit |
| Component | Coil spring |
| Material | Steel wire |
Vehicle fitment
It fits 2002–2006 Cadillac Escalade (Base), 2000–2006 Chevrolet Tahoe (Base, LS, LT, Limited, Z71) and 2000–2006 GMC Yukon (SL, SLE, SLT).
Other generations and model years, and other Cadillac, Chevrolet and GMC models, fall outside this fit. Match your vehicle’s year, model and trim to the fit before buying.
Installation notes
The spring is intended for vehicles with factory air ride suspension, so the air spring is removed and the coil spring takes its place. A matching Bilstein shock is needed for Nivomat conversions and is not included, so confirm the shock before installing. Support the vehicle securely on jack stands before removing any suspension component.
What’s included
One Bilstein coil spring for the rear position.
Not included: an appropriate Bilstein shock needed for air leveling Nivomat conversions.




