Overview
The Rock Krawler RK00215 is a set of rear coil springs for a 3.5 inch lift, in black. It fits Jeep Wrangler LJ models from 2004 to 2006 and TJ models from 1997 to 2006.
Rock Krawler says its coil springs combine three spring rates to maximize effective travel and keep the spring seated at full droop. The design is meant to minimize settling and provide a quality ride with strong off-road performance.
Key features
- Three combined spring rates for effective travel
- Designed to minimize settling
- Keeps the spring seated at full droop
- 3.5 inch lift
- Black finish
Matching springs to the build
Rear coil springs carry the axle’s weight and set how the rear sits at ride height, so their rate matters as much as the lift number. Three combined rates are used to smooth the ride under load and to hold the spring seated as the axle drops. A spring that sits well on its perch keeps the coil from walking during full articulation, which helps the rear hold a line on uneven ground.
When choosing an upgrade, look at the rest of the rear setup. Shock length, bump stops and brake line length often need to change with a lift, and track bar geometry should be checked too. Heavier tires add load, so spring ratings should match the weight you carry. Inspect springs once a year for cracks, corrosion at the seat and sagging coils, and replace any that show damage.
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RK00215 |
| Position | Rear |
| Lift height | 3.5 inch |
| Spring design | Three combined spring rates |
| Finish | Black |
| Fitment label | Direct fit |
Vehicle fitment
It fits 2004–2006 Jeep Wrangler (LJ) Unlimited models and 1997–2006 Jeep Wrangler (TJ) models. Wrangler YJ (1987–1995), JK (2007–2018) and JL models are outside that fit. Confirm your vehicle’s year, model and trim before ordering.
Wrangler YJ (1987–1995), JK (2007–2018) and JL models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Raising the rear with new springs changes driveline angles, so check the pinion angle after installation. Support the axle while the springs are changed, since the springs carry the rear axle’s weight.
What’s included
Rear coil springs. Check the package contents against your installation before starting, including the spring count, shocks, bump stops and hardware.









