Select your vehicle

Baja Designs 2-Lights Squadron/S2 Wire Harness – 640117

Baja Designs

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 12v wiring harness for up to two Baja Designs LED or HID lights
  • Capable of powering up to 12 amps
  • Includes an on/off toggle button
  • Part number 640117; universal fit

Description

Overview

The Baja Designs 640117 is a 2-light Squadron/S2 wire harness. It is a universal 12v harness that powers up to two Baja Designs LED or HID lights and handles up to 12 amps. It is designed for Fuego, PreRunner, LaPaz, Squadron and SII lights.

An on/off toggle button provides power to the lights from the harness.

Key features

  • On/off toggle button controls power to the lights
  • Ready to power up to two Baja Designs LED or HID lights
  • Capable of up to 12 amps
  • Designed for Fuego, PreRunner, LaPaz, Squadron and SII lights

Wiring for auxiliary lights

A harness like this sits between the battery and the lights, so its protection and switching affect the whole circuit. Fuse the feed close to the battery, using a fuse rated for the light load you plan to run. Keep the positive and ground runs short where possible, and secure the harness so it does not rub on the frame or sharp edges.

Check the connectors for corrosion after wet trail runs, and look at the toggle switch for loose mounting or intermittent contact. A harness that gets warm at the switch or connector should be inspected before continued use. When adding lights later, recalculate total draw so the combined load stays inside the harness rating.

  • Fuse the feed near the battery
  • Check connectors after wet trails
  • Recalculate draw before adding lights

Specifications

Brand Baja Designs
Part number 640117
Voltage 12v
Current capacity Up to 12 amps
Lights supported Up to two LED or HID lights
Switch On/off toggle

Vehicle fitment

The harness is universal fit and is not tied to a vehicle. Match it to the Baja Designs light models it is designed for: Fuego, PreRunner, LaPaz, Squadron and SII.

No vehicle make, model or year is named for this harness.

Installation notes

Route power through a fused circuit, and check your state’s rules for auxiliary lights before using them on public roads.

What’s included

A 12v wiring harness with an on/off toggle button.

Not included: the Baja Designs lights the harness powers.

Questions & Answers

Does the Baja Designs 640117 fit a specific vehicle?

It is not tied to a vehicle. It is universal fit and is designed for Fuego, PreRunner, LaPaz, Squadron and SII lights, so match it to those light models rather than to a make, model or year.

How many lights can this harness power?

Up to two Baja Designs LED or HID lights. The harness is rated for up to 12 amps, so add up your lights' draw and confirm it stays within that before wiring.

Does the harness have a switch?

Yes. It has an on/off toggle button that controls power to the lights. Route power through a fused circuit, and check local rules for auxiliary lights before using them on public roads.

Can I add a relay to this harness?

Yes, a relay can reduce the load on the toggle switch when lights draw more current. Use a relay rated for the lights and wire it with a fuse. Confirm the total current stays within the harness rating before adding any component.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon