Select your vehicle

Rigid Industries Harness Extension – 40197

Rigid Industries

$39.99In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 8:00 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Universal fit 1 meter harness extension for Rigid Industries Add-a-Light, part number 40197
  • 14 AWG wire and Deutsch DT connector
  • Designed for listed Rigid Industries light series

Description

Overview

The Rigid Industries 40197 is an Add-a-Light harness extension that adds 1 meter of length to a compatible Rigid Industries light harness. It uses 14 AWG wire and a Deutsch DT connector.

The extension is designed for several Rigid Industries light series rather than for a vehicle, so it is universal fit. Match the connector and light series before installing.

Key features

  • 1 meter of additional length
  • 14 AWG wire
  • Deutsch DT connector
  • Designed for SRM, SRQ, Dually, SR series, Q series and RDS products
  • Also designed for E series products

Extending a light harness

A harness extension adds length without replacing the existing wire, which can be useful when a light sits farther from the power source than the original lead reaches. The joint between the two harnesses is the main point of concern, so the connection should be dry, fully seated and protected from splash. Keep the extension routed away from heat and sharp edges.

Longer runs carry more resistance, so keep the total length as short as the mounting position allows. Secure the wire with clips every so often so it does not sag into moving parts. Inspect the joint and the connector seals regularly, especially after wet or muddy trips, and replace any damaged seal before it lets in moisture.

  • Keep the joint dry and fully seated
  • Use clips to prevent sag
  • Inspect seals after wet trips

Specifications

Brand Rigid Industries
Part number 40197
UPC 815711013016
Added length 1 meter
Wire gauge 14 AWG
Connector Deutsch DT

Vehicle fitment

This extension is universal fit and is not vehicle-specific. Compatibility is set by the Rigid Industries light series it serves.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Check the connector and light series before cutting or splicing any existing lead. Use a fused, relay-controlled power feed for the lights the extension serves.

What’s included

The package is a 1 meter harness extension.

Not included: the lights and the main harness the extension lengthens.

SKU: RIG40197 Category:

Specification

Shipping weight 1.00 lbs
Package dimensions 12.00 × 3.00 × 3.00 in
brands

Questions & Answers

What is the Rigid Industries 40197?

It is an Add-a-Light harness extension, part number 40197, that adds an additional 1 meter of length. It uses 14 AWG wire and a Deutsch DT connector, and it is designed for several Rigid Industries light series.

Which lights does the 40197 extension work with?

The extension works with SRM, SRQ, Dually, SR series, Q series and RDS products, as well as E series products. Match your light's series and connector to that list before installing.

Does the 40197 extension fit a specific vehicle?

No vehicle years or models are listed. The extension is matched to Rigid Industries light series and connectors, so check your light model rather than your vehicle before installing.

How do I know a harness needs an extension?

An extension is needed when the existing lead cannot reach the light without strain or tight bends. Check the reach first, since pulling wire taut at the connector can damage the seal and the pins over time.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon