Overview
The ARB fog light wiring loom, part number 3500530, is a wiring kit for fog and driving lights from ARB 4×4 Accessories. It is a universal fit. Match the wiring to the lights and the vehicle’s electrical system before installation.
Wiring and power supply
Fog and driving lights draw more current than a typical interior load, so the wiring needs its own protected path from the battery. Many installs use a relay so the switch only carries a small control current, while the lights draw power through a fuse placed close to the battery. Route the wire away from moving parts, sharp edges and hot exhaust components.
Good grounding matters as much as the power feed. A poor ground can cause dim lights, flicker and heat at the connection. Scrape paint from the grounding point, use a clean metal surface, and seal the terminal against moisture. Inspect the loom now and then for chafing, cracked insulation or corroded connectors, especially after off-road trips.
- Confirm the fuse rating suits the wire gauge
- Use weatherproof connectors at exposed joints
- Keep switch wiring separate from the power feed
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 3500530 |
| UPC | 9332018017901 |
| Type | Fog light wiring loom |
Installation notes
Route the loom through a fused circuit and check local rules before using fog or driving lights on public roads.
What’s included
One fog light wiring loom.









