Overview
The Baer Brakes 4262260S is a silver SS4 Plus rear brake system for Ford 9 inch early big bearing housing ends, sized for a 5×4.50/5×4.75 wheel bolt pattern. It uses a 4-piston S4 caliper on a 13 inch 2-piece slotted, drilled and zinc-plated rotor with a billet aluminum hat.
Each rotor arrives pre-assembled with NAS high grade stainless hardware, and the backing plate carries a 1-piece park brake shoe assembly. The 13 inch rotor suits most 17 inch or larger wheels. Match the kit to your axle flange and wheel pattern before ordering.
Key features
- 4-piston S4 caliper in a 2-piece design, made in Phoenix, Az
- Silver powder coated caliper finish
- Hard anodized aluminum pistons with stainless steel abutments
- Dual seals for dust, weather and pressure
- 2-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- Rotor pre-assembled with NAS high grade stainless hardware
- Stainless braided hoses and hardware included
- 1-piece park brake shoe assembly built into the backing plate
Choosing rear brake upgrades
A rear disc conversion changes how the axle handles braking load, so the wheel, bearing and hub setup should be considered together. Larger rotors and calipers add stopping force, and the rear axle must be able to carry that load without flexing or loosening its mounting hardware.
Before buying, check the axle flange, wheel bolt pattern and the minimum wheel diameter, then confirm that the caliper and rotor clear the wheel. Many owners replace the brake hoses, pads and park brake cables at the same time, since worn parts in those areas can limit the benefit of a new rotor and caliper.
After installation, inspect the rotor surface and pads regularly for heat cracking, uneven wear and scoring. Re-check lug nut torque after the first few drives, and look for fluid seepage at the caliper seals and hose connections.
- Confirm wheel clearance around the caliper and rotor
- Replace hoses and pads when the rear system is rebuilt
- Check park brake adjustment after the first few uses
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262260S |
| UPC | 844165028352 |
| Caliper | S4, 4-piston, fixed |
| Caliper color | Silver |
| Rotor type | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Rotor outside diameter | 13.0 inch |
| Rotor thickness | 0.81 |
| Rotor surface | Slotted, drilled and zinc plated |
| Lug count | 5 lug |
| Bolt pattern | 5×4.50/5×4.75 |
| Minimum wheel diameter | 17.0 inch |
| Brake pad FMSI number | DR1-C |
| Pad type | DR1 or HB100 |
| Template | S135H |
| Hose material | Steel braided, DOT approved |
| Axle flange | Ford 9 Inch Early Big Bearing (rear) |
| Park brake | Included |
| Emission code | 6 |
| Sold as | Kit |
| Country of origin | US |
Vehicle fitment
The kit is made for Ford 9 inch early big bearing housing ends. Confirm fit for your vehicle’s year, model and trim before ordering, and compare template S135H against your wheel’s diameter and bolt pattern.
Fit cannot be guaranteed for every wheel style or manufacturer. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The rotors arrive with stainless hardware already assembled, so no separate rotor fasteners are needed. Park brake cables and lug nuts are not included. Because rear rotors and calipers carry stopping force, have a qualified technician install the kit and verify braking before use.
What’s included
The kit includes the silver S4 caliper, the backing plate with its park brake shoe assembly, the 2-piece rotor with pre-assembled hardware, and stainless braided hoses with hardware.
Not included: park brake cables, lug nuts and the front rotor.















