Overview
Baer’s Extreme Plus front kit in red, part 4301525R, brings a one-piece six-piston 6S caliper and a 15-inch two-piece slotted, drilled rotor to front disc brakes on GM 1500 trucks and SUVs. The front rotor is included with the kit.
Red is the caliper finish, and the one-piece six-piston caliper uses a fixed mount rather than a floating design. Wheels 19 inches or larger are the intended match for this front system, which covers GM 1500 trucks and SUVs through 2023.
Key features
- Red powder-coated one-piece 6S caliper with six pistons in fixed mounting
- Caliper body CNC cut from 2618 aluminum
- Stainless pistons, abutments and noise suppression clips
- Staggered pistons for more even pad wear
- Two-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- Rotor arrives pre-assembled with NAS stainless hardware
- Dual dust, weather and pressure seals
- D1247 pad type; intended for 19-inch and larger wheels
Red caliper and pad replacement
Pad replacement on a fixed caliper is straightforward, but the pistons must be pushed back evenly before new pads go in. Pushing one side faster than the other can damage the seals or cause a pull under braking. A clamp or flat tool works well for this job, and the reservoir level should be checked first.
Front rotors on GM trucks see high heat and load, so the surface can glaze if pads are not bedded in properly. After new pads and rotors are fitted, make a series of moderate stops to transfer an even layer of friction material before normal driving.
- Push pistons back slowly and evenly
- Check the reservoir level before pressing pistons
- Bed in new pads with moderate stops
- Keep the caliper coating free of brake dust
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301525R |
| UPC | 844165049654 |
| Sold as | Kit |
| Axle | Front |
| Caliper | 6S, one-piece monoblock, six pistons, fixed |
| Caliper color | Red |
| Caliper finish | Powder coated |
| Rotor outside diameter | 15.0 inches |
| Rotor thickness | 1.25 inch |
| Rotor type | 2-piece |
| Rotor style | Vented, slotted, drilled |
| Rotor material | Iron with aluminum hat, zinc plated |
| Pad type | D1247 (FMSI) |
| Wheel bolt pattern | 6×5.50 |
| Lug count | 6 lug |
| Minimum wheel diameter | 19.0 inches |
| Template | N077U |
| Emission code | 6 |
| Grade | Performance |
| Hose | Re-uses OE hoses |
| Front rotor included | Yes |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
Covered vehicles include 1999–2023 GMC Sierra 1500, 1999–2023 Chevrolet Silverado 1500, 2000–2023 GMC Yukon, 2000–2023 Chevrolet Tahoe, 2002–2023 Cadillac Escalade, 2003–2023 Cadillac Escalade ESV, 2002–2013 Cadillac Escalade EXT, 2007–2013 Chevrolet Avalanche, 2002–2006 Chevrolet Avalanche 1500, 2015–2023 Chevrolet Suburban, 2000–2014 Chevrolet Suburban 1500, 2015–2023 GMC Yukon XL and 2000–2014 GMC Yukon XL 1500.
Rear brake applications are not covered by this front kit, and model years after 2023 are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotor is pre-assembled, so the NAS stainless hardware is already in place, and the factory hoses are re-used. Compare the N077U template to your wheel before fitting, because the minimum wheel diameter is 19.0 inches.
What’s included
Included are the red 6S front caliper, the 15-inch two-piece rotor, brackets, hardware and NAS stainless rotor hardware.
Not included: lug nuts.














