Overview
The Baer Brakes 4262264S is a silver SS4 rear brake system kit for Ford 9 inch rear ends that use Torino (late big) bearing housing ends, with a 5 on 5 bolt pattern (5×5.00). It centers on an S4 4-piston caliper and a 12.0 inch, 1-piece slotted and drilled zinc-plated rotor.
The backing plate mounts the caliper and houses a modern 1-piece park brake shoe assembly, so the park brake hardware comes with the kit. The 12 inch SS4 suits most 16 inch or larger wheels, but fit cannot be guaranteed for every wheel style, so check the S113E template against the wheel you plan to run.
Key features
- S4 caliper with four pistons, manufactured in Phoenix, AZ.
- CNC machined from U.S.-sourced forged or billet aluminum.
- Powder coated silver finish.
- Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips.
- Dual seals guard against dust, weather and pressure.
- 1-piece slotted, drilled, zinc-plated rotor at 12.0 inch outside diameter.
- Braided brake hoses, DOT approved.
Rear brake fitment basics
A rear disc kit replaces the braking hardware at the axle, so fit comes down to the axle flange, the bolt pattern and wheel clearance. Measure the mounting face on the housing ends and compare it with your flange before ordering. Caliper size matters less than whether the backing plate lines up, because that plate carries both the caliper and the park brake shoes.
Rear rotors often wear faster on vehicles that tow or run in mud and sand. Check the rotor face and pad surface at each tire rotation, and look for scoring, uneven wear, a pulsing pedal or grinding. Brake dust and road grime build up around powder coated calipers, so clean them during routine inspection.
- Recheck park brake shoe adjustment after mounting
- Replace park brake cables that are stretched or corroded
- Torque lug nuts in a star pattern after the first drive
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262264S |
| UPC | 844165028598 |
| Sold as | Kit |
| Caliper | S4, 4 pistons, fixed, silver |
| Pad FMSI number | DR1-C |
| Template | S113E |
| Axle | Rear, Ford 9 Inch Torino/Late Big Bearing flange |
| Rotor outside diameter | 12.0 Inch |
| Rotor thickness | 1.02 |
| Rotor construction | 1-piece, vented, slotted, drilled, zinc plated, iron |
| Wheel bolt pattern | 5×5.00 (5 lug) |
| Minimum wheel diameter | 16.0 Inch |
| Park brake | Shoe assembly included; park brake cables not included |
| Brake hose | DOT approved, braided |
| Front rotor included | No |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
It is built for Ford 9 inch rear ends with Torino (late big) bearing housing ends and a 5×5.00 bolt pattern. Confirm the model years that run that axle style before ordering.
Ford 9 inch axles with other flange styles need a separate check. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Park brake cables are not part of this kit, so the park brake function needs a separate cable set. The front rotor and lug nuts are also outside the package. Bleed the hydraulic system once the braided hoses are attached, and have a qualified technician inspect the rear brakes before the vehicle is driven.
What’s included
The kit contains the silver S4 caliper, the 12.0 inch 1-piece rotor, the backing plate with its park brake shoe assembly, and braided brake hoses.
Not included: Park brake cables, the front rotor and lug nuts.















