Overview
The Baer Brakes 4262323C is a rear SS4 Plus 11.0 Inch Deep Stage drag brake kit with clear calipers, built for GM small pattern 10/12 bolt bearing-on-axle housing ends with non-flush mounts. Two four-piston S4 calipers clamp 11-inch two-piece slotted and drilled rotors, aimed at heavy, fast cars that may also be driven on the street.
This Deep Stage system is intended for drag race use, and the kit comes with high friction pads designed for that purpose. It is a single set of rear calipers with no park brake. Its wheel fit starts at 15 inch diameter. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Two-piece S4 rear calipers with four pistons each, in clear finish, with hard anodized aluminum pistons measuring 1.75 inch
- High friction pads designed for drag race applications, standard with the kit
- Stainless steel abutments and noise suppression clips
- Two-piece slotted, drilled, zinc-plated rotors with an 11.0 inch outside diameter
- Billet aluminum hats drilled for 5/8 inch wheel studs
- Minimum wheel diameter of 15.0 inch
Pads and heat management
High friction pads grip harder as temperatures climb, which suits repeated hard stops, but they behave differently from street compounds. Cold pads may bite more slowly, and the friction material can leave more dust on the wheels and wear rotor faces faster than a mild pad would.
Rotor condition matters as much as pad choice. Heat cycling can produce surface checking or uneven wear, and a worn rotor can make the pads seat poorly. Brake fluid absorbs moisture over time and loses boiling resistance, so fresh fluid is part of keeping the system predictable under load.
- Bed in pads gradually before hard runs
- Expect more dust and rotor wear with aggressive compounds
- Inspect rotor faces for heat checking
- Keep brake fluid fresh under high temperatures
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262323C |
| UPC | 844165049142 |
| Kit contents | Two S4 rear calipers, two-piece rotors, high friction pads, mounting hardware |
| Caliper | S4, four pistons, fixed type, clear finish |
| Piston diameter | 1.75 inch |
| Bearing | 3.150 inch |
| Rotor outside diameter | 11.0 inch |
| Rotor thickness | 1.02 |
| Rotor construction | Two-piece, vented, slotted and drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Axle flange | GM Small Pattern 10/12 Bolt Bearing on Axle (Buick/Olds/Pontiac), non-flush mount |
| Axle flange dimension | 5.75 inch |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Minimum wheel diameter | 15.0 inch |
| Pad type | DR1 (FMSI) |
| Friction material | Semi-metallic |
| Hub | Billet aluminum, drilled for 5/8 inch wheel studs |
| Park brake | Not included |
| Hoses | Not included |
| Front rotor included | No |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
No vehicle years, makes or models are given for this kit. It is built for the GM small pattern 10/12 bolt bearing-on-axle flange, which the flange entry names for Buick, Olds and Pontiac axles, so match the housing ends on your rear axle before ordering.
Torino-bearing housing ends from Ford are a separate flange and fall outside this kit’s coverage. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rotors arrive pre-assembled with the stainless hardware, and mounting hardware is included. Measure the housing against the 5.75 inch axle flange dimension before fitting. Lug nuts, hoses and a park brake are not in this box.
What’s included
Two S4 four-piston rear calipers in clear finish with 1.75 inch pistons, two-piece rotors pre-assembled with stainless hardware, high friction drag race pads, and mounting hardware.
Not included: front rotors, park brake, hoses and lug nuts.















